Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Panel
  • 2 steps
  • Fan
  • 2 steps

Flags

0

  • BackHP Pavilion 17-x047na

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off and unplug the laptop before replacing the battery.
  • The netbook needs to be top-side down with the lid closed.
  • Slide the plastic battery release latches towards the lock symbols.

Turn off and unplug the laptop before replacing the battery.

The netbook needs to be top-side down with the lid closed.

Slide the plastic battery release latches towards the lock symbols.

1024

Step 2

  • Slide the battery out from the laptop.

Slide the battery out from the laptop.

Step 3

              Back Panel
  • Using a Phillips #0 screwdriver, remove thirteen 7.0 mm screws from the back case.
  • Using a Phillips #0 screwdriver, remove the CD/DVD drive screw.
  • Use an ejection pin to eject and remove the CD/DVD drive.

Using a Phillips #0 screwdriver, remove thirteen 7.0 mm screws from the back case.

Using a Phillips #0 screwdriver, remove the CD/DVD drive screw.

Use an ejection pin to eject and remove the CD/DVD drive.

Step 4

  • Use an iFixit opening tool to separate the back cover from the laptop.
  • Gently pry open the cover, trying not to break the plastic.

Use an iFixit opening tool to separate the back cover from the laptop.

Gently pry open the cover, trying not to break the plastic.

Step 5

              Fan
  • Remove the five screws attaching the fan to the motherboard using a Phillips #0.
  • Disconnect the wire connecting the fan to the motherboard.

Remove the five screws attaching the fan to the motherboard using a Phillips #0.

Disconnect the wire connecting the fan to the motherboard.

Step 6

  • Using a Phillips # 0 screwdriver, remove the five 3.0 mm screws.
  • Disconnect the wire.
  • Then remove the fan.

Using a Phillips # 0 screwdriver, remove the five 3.0 mm screws.

Disconnect the wire.

Then remove the fan.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Khaise Brice

Member since: 10/30/2019

459 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of Memphis, Team S4-G1, Kim Fall 2019                        

                                                  Member of University of Memphis, Team S4-G1, Kim Fall 2019 



                    UM-KIM-F19S4G1                     


                                            3 Members                     


                                            4 Guides authored