Hp Pavilion 17 Ts Disk Drive Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          30 seconds            

Sections

• Battery
• 1 step
• Rear Cover
• 1 step
• Disk Drive
• 1 step

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHP Pavilion 17-e160us

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Press and hold the release switch, and then slide the battery out. Insert the new battery into the slot and you’re done!

Press and hold the release switch, and then slide the battery out. Insert the new battery into the slot and you’re done!

1024

Step 2

              Rear Cover               

• In the battery compartment, find the phillips screw that is holding the rear panel onto the computer. Unscrew it.
• With the battery compartment closest to you, push the panel away from you. Once it slides back until it stops, gently lift it and put it to the side.
• Please note that this particular screw does not completely come out, it stays with the rear panel and that is ok.

In the battery compartment, find the phillips screw that is holding the rear panel onto the computer. Unscrew it.

With the battery compartment closest to you, push the panel away from you. Once it slides back until it stops, gently lift it and put it to the side.

Please note that this particular screw does not completely come out, it stays with the rear panel and that is ok.

Step 3

              Disk Drive               

• With the battery compartment closest to you, there will be a 9mm screw next in the center-right of the back plate, labeled with a keyboard symbol and a disk symbol. Remove this phillips screw.
• In the opening next to the screw, gently push out against the disk drive, and remove it from the disk drive compartment.

With the battery compartment closest to you, there will be a 9mm screw next in the center-right of the back plate, labeled with a keyboard symbol and a disk symbol. Remove this phillips screw.

In the opening next to the screw, gently push out against the disk drive, and remove it from the disk drive compartment.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Eric Sowersby                     

Member since: 03/25/2016

413 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team 1-6, Miles Spring 2016                        

                                                  Member of UMass Dartmouth, Team 1-6, Miles Spring 2016 



                    UMASSD-MILES-S16S1G6                     


                                            3 Members                     


                                            9 Guides authored