Hp Pavilion 17 F004Dx Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 - 45 minutes

Sections

Battery
2 steps
CD Drive
2 steps
Front Panel
12 steps
Hard Drive
4 steps

Flags

BackHP Pavilion 17-f004dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Before you remove the battery, make sure the laptop is powered off.
Slide the black battery latches inward to remove the battery.

Before you remove the battery, make sure the laptop is powered off.

Slide the black battery latches inward to remove the battery.

1024

Step 2

Pull the battery out towards you while your fingers are still holding the latches in place.

Pull the battery out towards you while your fingers are still holding the latches in place.

Step 3

              CD Drive

Remove one 7 mm screw with a Phillips #1 screwdriver.

Remove one 7 mm screw with a Phillips #1 screwdriver.

Step 4

Use a metal spudger to push the CD drive out of its slot for removal.

Use a metal spudger to push the CD drive out of its slot for removal.

Step 5

              Front Panel

Remove fifteen 7 mm screws with a Phillips #1 screwdriver.

Remove fifteen 7 mm screws with a Phillips #1 screwdriver.

Step 6

Remove the thin plastic cover using the flat metal spudger to expose another screw.
Remove one 7 mm screw with a Phillips #0 screwdriver.

Remove the thin plastic cover using the flat metal spudger to expose another screw.

Remove one 7 mm screw with a Phillips #0 screwdriver.

Step 7

Use a metal spudger to remove the rubber “feet” to expose two screws.

Use a metal spudger to remove the rubber “feet” to expose two screws.

Step 8

Underneath each rubber foot, there is a screw.
Use the Phillips #1 screwdriver to remove a 4.8 mm screw on each side.

Underneath each rubber foot, there is a screw.

Use the Phillips #1 screwdriver to remove a 4.8 mm screw on each side.

Step 9

Remove the two black end caps to expose more screws.
The end caps will require some force to remove.

Remove the two black end caps to expose more screws.

The end caps will require some force to remove.

Step 10

Remove the following six screws with a Phillips #1 screwdriver:
Two 7 mm screws.
Two 7 mm screws.
Two 4.8 mm screws.

Remove the following six screws with a Phillips #1 screwdriver:

Two 7 mm screws.

Two 4.8 mm screws.

Step 11

Remove two 2.4 mm broadhead screws from the CD Drive bay with a Phillips #0 screwdriver.

Remove two 2.4 mm broadhead screws from the CD Drive bay with a Phillips #0 screwdriver.

Step 12

Flip the laptop back over. Then, with the laptop open, move the plastic prying tool around the top cover to pry it from the enclosure.

Flip the laptop back over. Then, with the laptop open, move the plastic prying tool around the top cover to pry it from the enclosure.

Step 13

Partially lift the top cover from the enclosure.

Partially lift the top cover from the enclosure.

Step 14

Remove the ribbon connecting the power button to the motherboard.

Remove the ribbon connecting the power button to the motherboard.

Step 15

Remove the ribbon connecting the mousepad to the motherboard.

Remove the ribbon connecting the mousepad to the motherboard.

Step 16

Remove the ribbon connecting the keyboard to the motherboard.
You may now fully lift the front panel from the rest of the laptop.

Remove the ribbon connecting the keyboard to the motherboard.

You may now fully lift the front panel from the rest of the laptop.

Step 17

              Hard Drive

Lift the black retaining bar that holds down the two hard drive ribbons to unlock them.

Lift the black retaining bar that holds down the two hard drive ribbons to unlock them.

Step 18

Gently pull the ribbons out.

Gently pull the ribbons out.

Step 19

Lift the hard drive out from the enclosure.

Lift the hard drive out from the enclosure.

Step 20

Pull the rubber casing away from the hard drive.

Pull the rubber casing away from the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 5 other contributors

                    Allan Soria

Member since: 09/21/2016

566 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UC Davis, Team 1-4, Oliver Fall 2016                        

                                                  Member of UC Davis, Team 1-4, Oliver Fall 2016 



                    UCD-OLIVER-F16S1G4                     


                                            4 Members                     


                                            8 Guides authored

Shaun Krug - Nov 19, 2020

Thank you. Couldn’t figure out why those end caps wouldn’t budge. Dang hidden screws! Kudos!

Introduction#

What you need#

Team#

Introduction

What you need

Team