Difficulty

Difficult

Steps

14

Time Required

                          35 minutes

Sections

4

  • Battery
  • 3 steps
  • Keyboard
  • 7 steps
  • Motherboard
  • 3 steps
  • Charger Port
  • 1 step

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackHP Pavilion 17-e146us

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the device over.

Turn the device over.

1024

Step 2

  • Move the battery lock switch to the right to unlock. The battery release button will unlock the battery from the computer.
  • The battery release button is located above the the battery.

Move the battery lock switch to the right to unlock. The battery release button will unlock the battery from the computer.

The battery release button is located above the the battery.

Step 3

  • The battery will unlock from the computer.
  • Remove the unlocked battery from the computer.

The battery will unlock from the computer.

Remove the unlocked battery from the computer.

Step 4

              Keyboard
  • Remove the 6.25 mm screw in the left-lower hand corner of the battery port using a Phillips head screw driver.

Remove the 6.25 mm screw in the left-lower hand corner of the battery port using a Phillips head screw driver.

Step 5

  • Remove the HP protect smart ventilation case.
  • The smart ventilation is a part of the back cover of the device

Remove the HP protect smart ventilation case.

The smart ventilation is a part of the back cover of the device

Step 6

  • Remove seven 6.5 mm screws using a Phillips #0 screwdriver.
  • Remove four 3.0 mm screws located in the charger port using a Phillips #0 screwdriver.

Remove seven 6.5 mm screws using a Phillips #0 screwdriver.

Remove four 3.0 mm screws located in the charger port using a Phillips #0 screwdriver.

Step 7

  • Pull and remove the disk drive.
  • The disk drive is located on the left side of the device when it is turned over.
  • Remove two 3.00 mm screws on the inside of the disk drive using a Phillips screwdriver.

Pull and remove the disk drive.

The disk drive is located on the left side of the device when it is turned over.

Remove two 3.00 mm screws on the inside of the disk drive using a Phillips screwdriver.

Step 8

  • Apply firm pressure inside the release port using a narrow tool such as a screw driver or tweezers.
  • The release port releases the keyboard.

Apply firm pressure inside the release port using a narrow tool such as a screw driver or tweezers.

The release port releases the keyboard.

Step 9

  • Flip device over so that the cover is facing towards you

Flip device over so that the cover is facing towards you

Step 10

  • Open device. The keyboard should be separate from the inside panel.
  • If the keyboard does not automatically pop out, use a spudger or opening tool along the edge of the front panel and the keyboard to pop the keyboard out.
  • Detach the keyboard’s cable connector from the motherboard.

Open device. The keyboard should be separate from the inside panel.

If the keyboard does not automatically pop out, use a spudger or opening tool along the edge of the front panel and the keyboard to pop the keyboard out.

Detach the keyboard’s cable connector from the motherboard.

Step 11

              Motherboard
  • Remove three 6.5 mm Phillips screws located underneath the keyboard using a Phillips #0 screwdriver.

Remove three 6.5 mm Phillips screws located underneath the keyboard using a Phillips #0 screwdriver.

Step 12

  • Place wedge tool in-between the front panel and the cover underneath the keyboard
  • Use wedge tool to pop the two covers apart.
  • This may require some force.

Place wedge tool in-between the front panel and the cover underneath the keyboard

Use wedge tool to pop the two covers apart.

This may require some force.

Step 13

  • Remove the motherboard using your hands
  • The motherboard is large green portion located inside the device

Remove the motherboard using your hands

The motherboard is large green portion located inside the device

Step 14

              Charger Port
  • The charging port is attached to the motherboard and is on the right side of the device if it is facing you.
  • Remove the charging port from motherboard by hand.
  • Be careful not to break the motherboard during removal

The charging port is attached to the motherboard and is on the right side of the device if it is facing you.

Remove the charging port from motherboard by hand.

Be careful not to break the motherboard during removal

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Emma Neumann

Member since: 09/04/2019

629 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of Alabama, Team S2-G7, Bedsole Fall 2019                        

                                                  Member of University of Alabama, Team S2-G7, Bedsole Fall 2019 



                    UA-BEDSOLE-F19S2G7                     


                                            3 Members                     


                                            5 Guides authored