Hp Pavilion 15 N210Dx Keyboard Replacement Repair Guide

Difficulty

Very easy

Steps

5

Time Required

                          1 - 5 minutes            

Sections

2

• Battery
• 2 steps
• Keyboard
• 3 steps

Flags

1

Needs More Images

A few more images would make this guide’s procedures crystal clear.

• BackHP Pavilion 15-n210dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This guide will help you replace the keyboard of the HP Pavilion 15-n210dx if you are having difficulties with it. Difficulties can include numerous keys missing, broken key caps, or unresponsive keys.

The keyboard is made to endure millions of strokes. Sometimes a combination of keys need to be pressed to execute an action. When keys start to stop working, replacing the keyboard as a whole is recommended. If only a couple keys need to be replaced, refer to the keyboard section of the troubleshooting page.

Only a metal spudger is needed for this replacement.

What you need

Step 1

              Battery               

• Turn the laptop over.

Turn the laptop over.

1024

Step 2

• Push the pins towards each other using your thumbs. The battery will pop out a little bit. Remove it using your hand.

Push the pins towards each other using your thumbs. The battery will pop out a little bit. Remove it using your hand.

Step 3

              Keyboard               

• Turn over the laptop and remove the single screw using a Tri-point Y0 screwdriver.

Turn over the laptop and remove the single screw using a Tri-point Y0 screwdriver.

Step 4

• Open the laptop and use a spudger gently to get under the keyboard. Loosen the keyboard on all sides and then lift it up.

Open the laptop and use a spudger gently to get under the keyboard. Loosen the keyboard on all sides and then lift it up.

Step 5

• Use the spudger to unhinge the fastener and remove the connector.
• The keyboard should be completely detached from the computer now.

Use the spudger to unhinge the fastener and remove the connector.

The keyboard should be completely detached from the computer now.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Brayan Rivas                     

Member since: 10/25/2021

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team 3-8, Sinclaire Fall 2021                        

                                                  Member of UMass Dartmouth, Team 3-8, Sinclaire Fall 2021 



                    UMASSD-SINCLAIRE-F21S3G8                     


                                            4 Members                     


                                            6 Guides authored