Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Back Panel
  • 4 steps
  • Battery
  • 2 steps

Flags

0

  • BackHP Pavilion 15-eg0025nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Your HP Pavilion 15-eg0025nr battery may need to be removed if it is broken and needs to be replaced. If your laptop dies frequently when it is not being charged, it may be a problem with the battery. To find out if your HP Pavilion 15-eg0025nr battery needs to be replaced, visit our troubleshooting guide. Other repairs to the laptop may also require that you remove the battery beforehand.

What you need

Step 1

              Back Panel
  • Unplug and turn off the laptop before removing the back panel
  • Flip over the computer so that the back panel is facing upwards.
  • Remove the two silver screws on the bottom of the laptop using a Phillips #00 screwdriver.

Unplug and turn off the laptop before removing the back panel

Flip over the computer so that the back panel is facing upwards.

Remove the two silver screws on the bottom of the laptop using a Phillips #00 screwdriver.

1024

Step 2

  • Peel up each end of the two gray rubber stoppers using your fingers or an opening pick.
  • This may be difficult if it is your first time removing them.
  • Remove the two black screws underneath the rubber stoppers with the Phillips #00 screwdriver

Peel up each end of the two gray rubber stoppers using your fingers or an opening pick.

This may be difficult if it is your first time removing them.

Remove the two black screws underneath the rubber stoppers with the Phillips #00 screwdriver

Step 3

  • Slide the opening pick around the edges of the laptop where the chassis has a seam.
  • You will hear a clicking noise as you undo the clips of the chassis.
  • It may be easier to start with the four corners of the laptop, and then follow through with the sides.

Slide the opening pick around the edges of the laptop where the chassis has a seam.

You will hear a clicking noise as you undo the clips of the chassis.

It may be easier to start with the four corners of the laptop, and then follow through with the sides.

Step 4

  • Remove the back panel completely.
  • With the back panel removed, you can now access parts of the laptop such as the fan or the battery.

Remove the back panel completely.

With the back panel removed, you can now access parts of the laptop such as the fan or the battery.

Step 5

              Battery
  • Remove the five screws from the battery using a Phillips #00 screwdriver.

Remove the five screws from the battery using a Phillips #00 screwdriver.

Step 6

  • Remove the battery from the laptop.

Remove the battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Khin Sandar Win

Member since: 09/06/2022

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of Colorado Denver, Team 1-1, Campeau Fall 2022                        

                                                  Member of University of Colorado Denver, Team 1-1, Campeau Fall 2022 



                    UCDENVER-CAMPEAU-F22S1G1                     


                                            4 Members                     


                                            3 Guides authored