Difficulty
Easy
Steps
7
Time Required
5 minutes
Sections
3
- Battery
- 1 step
- Back Panel
- 3 steps
- RAM
- 3 steps
Flags
0
BackHP Pavilion 15-d035dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Switch the first lock, with the padlock icon, to the open position.
- Then hold the second lock with the battery icon to the open position, while sliding out the battery pack.
Switch the first lock, with the padlock icon, to the open position.
Then hold the second lock with the battery icon to the open position, while sliding out the battery pack.
1024
Step 2
Back Panel
- Flip the laptop so that the back is facing upwards.
- Locate the small screw on the back that holds the “L” shaped panel.
- Using a 0 Phillip Screwdriver (4.0x4.7mm sized screw), unscrew the screw. It will not become detached from the panel but it will allow you to remove the back panel.
Flip the laptop so that the back is facing upwards.
Locate the small screw on the back that holds the “L” shaped panel.
Using a 0 Phillip Screwdriver (4.0x4.7mm sized screw), unscrew the screw. It will not become detached from the panel but it will allow you to remove the back panel.
Step 3
- Using a plastic opening tool, pry the back panel from the computer, going all the way around it.
- This will take a good amount of force and you will hear clicking noises as you snap each of the connections out of place.
Using a plastic opening tool, pry the back panel from the computer, going all the way around it.
This will take a good amount of force and you will hear clicking noises as you snap each of the connections out of place.
Step 4
- Once the back panel is completely removed you will have access to the RAM and many other connections in the computer.
Once the back panel is completely removed you will have access to the RAM and many other connections in the computer.
Step 5
RAM
- Locate the RAM, it is about a 2 inch by 1 inch rectangle that is blue in color.
Locate the RAM, it is about a 2 inch by 1 inch rectangle that is blue in color.
Step 6
- Press down on the small silver latches on either side of the RAM, the RAM should pop up. While doing this you will hear a faint click.
Press down on the small silver latches on either side of the RAM, the RAM should pop up. While doing this you will hear a faint click.
Step 7
- Finally remove the RAM by pulling it away from the black connection panel.
- Once the RAM is removed you can put in the replacement RAM.
Finally remove the RAM by pulling it away from the black connection panel.
Once the RAM is removed you can put in the replacement RAM.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Meredith Shaffer
Member since: 09/25/2017
222 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
University of North Texas, Team S1-G2, Thompson Fall 2017
Member of University of North Texas, Team S1-G2, Thompson Fall 2017
UNT-THOMPSON-F17S1G2
4 Members
6 Guides authored