Hp Pavilion 15 Bk020Wm Touchpad Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          6 minutes

Sections

Keyboard Cover
3 steps
Touchpad
3 steps

Flags

BackHP Pavilion x360 15-bk020wm
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard Cover

Before you begin, turn the laptop off and unplug it from the power source.
Remove the 4 computer feet. (Our device didn’t have these; they can be taken off with a plastic spudger.)
Remove the two screw cover strips.
Remove the two screw cover plugs.
Unscrew all 12 screws (size: Phillips M2.5×7.0 ) from the bottom of the computer.

Before you begin, turn the laptop off and unplug it from the power source.

Remove the 4 computer feet. (Our device didn’t have these; they can be taken off with a plastic spudger.)

Remove the two screw cover strips.

Remove the two screw cover plugs.

Unscrew all 12 screws (size: Phillips M2.5×7.0 ) from the bottom of the computer.

1024

Step 2

Turn the computer over to the front.
Open the laptop.
Use a plastic pry tool to pry up the keyboard cover near the hinge on both the right and left side, and work your way towards the touchpad.

Turn the computer over to the front.

Open the laptop.

Use a plastic pry tool to pry up the keyboard cover near the hinge on both the right and left side, and work your way towards the touchpad.

Step 3

Tilt the keyboard cover up slightly.
Do not fully remove the keyboard, as it is still attached to the laptop by some cables.

Tilt the keyboard cover up slightly.

Do not fully remove the keyboard, as it is still attached to the laptop by some cables.

Step 4

              Touchpad

After taking the keyboard cover off of the device, flip it over and locate the purple and white cable.
Using the plastic opening tool, flip the ZIF connector open and detach the touchpad cable.

After taking the keyboard cover off of the device, flip it over and locate the purple and white cable.

Using the plastic opening tool, flip the ZIF connector open and detach the touchpad cable.

Step 5

Unscrew the three screws at the bottom of the touchpad using the #00 Phillips screwdriver.
Life the bottom security piece off of the touchpad.
Unscrew the three top screws using the same #00 Phillips screwdriver.

Unscrew the three screws at the bottom of the touchpad using the #00 Phillips screwdriver.

Life the bottom security piece off of the touchpad.

Unscrew the three top screws using the same #00 Phillips screwdriver.

Step 6

Using the plastic opening tool, lift the touchpad off of the keyboard cover.

Using the plastic opening tool, lift the touchpad off of the keyboard cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Meshayla Block

Member since: 06/28/2017

425 Reputation

                                      3 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Eastern Washington University, Team S1-G2, Rowley Summer 2017                        

                                                  Member of Eastern Washington University, Team S1-G2, Rowley Summer 2017 



                    EWU-ROWLEY-SU17S1G2                     


                                            4 Members                     


                                            20 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team