Difficulty
Easy
Steps
6
Time Required
15 - 20 minutes
Sections
4
- Battery
- 1 step
- Disc Drive
- 3 steps
- Backplate
- 1 step
- Hard Drive
- 1 step
Flags
0
BackHP Pavilion 15-ba003ds
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The internal hard drive is a component that stores everything from documents, pictures, and videos to the computer’s operating system and application preferences. Some problems associated with a bad internal hard drive include files that will not open, unusual sounds, a lack of storage space, slow operation, a screen that freezes, or other such annoying behaviors.
Before following this guide, restart your computer, uninstall or delete unused applications and files, and perform any other diagnostics that might prevail problems, such as malware. A healthy computer requires vigilance and sufficient anti-virus software to be installed at all times. Any of these issues can potentially lead to a slow-down or hinder the operation of your computer.
There are no special skills needed to complete these instructions other than a steady hand. Before beginning this guide, make sure that you have all the required tools listed below as well as the new hard drive.
Carefully follow all power-down procedures described in step one.
What you need
Step 1
Battery
- Unplug the AC adapter from the corresponding socket in the laptop.
- Turn off your laptop before starting this procedure. Make sure it’s not in sleep or hibernation mode.
- Use your fingers to push the slider located just under the battery on either side to unlock the battery from the laptop.
- Carefully slide the battery out of the laptop frame and place it somewhere safe.
Unplug the AC adapter from the corresponding socket in the laptop.
Turn off your laptop before starting this procedure. Make sure it’s not in sleep or hibernation mode.
Use your fingers to push the slider located just under the battery on either side to unlock the battery from the laptop.
Carefully slide the battery out of the laptop frame and place it somewhere safe.
1024
Step 2
Disc Drive
- Remove the two rubber feet next to the battery.
Remove the two rubber feet next to the battery.
Step 3
- Remove twelve 8mm Phillips #00 screws including two underneath the rubber feet.
Remove twelve 8mm Phillips #00 screws including two underneath the rubber feet.
Step 4
- Pull out the disc drive by hand.
Pull out the disc drive by hand.
Step 5
Backplate
- Use a Jimmy to pry off the black backplate.
Use a Jimmy to pry off the black backplate.
Step 6
Hard Drive
- Remove the data connector from the hard drive.
Remove the data connector from the hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
LI XU
Member since: 01/14/2020
319 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
York University, Team S1-G9, Woodhouse Winter 2020
Member of York University, Team S1-G9, Woodhouse Winter 2020
YORK-WOODHOUSE-W20S1G9
3 Members
8 Guides authored