Difficulty

Difficult

Steps

8

Time Required

                          30 - 50 minutes

Sections

4

  • Battery
  • 1 step
  • Backplate
  • 1 step
  • Cooling Fan
  • 3 steps
  • Charging Port
  • 3 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackHP Pavilion 15-ba003ds

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

You can follow this guide if your AC adapter is not charging the laptop and you’re sure that the AC adapter is not faulty. Then you can attempt this repair to replace the charger in your laptop.

What you need

Step 1

              Battery
  • Unplug the AC adapter from the corresponding socket in the laptop.
  • Turn off your laptop before starting this procedure. Make sure it’s not in sleep or hibernation mode.
  • Use your fingers to push the slider located just under the battery on either side to unlock the battery from the laptop.
  • Carefully slide the battery out of the laptop frame and place it somewhere safe.

Unplug the AC adapter from the corresponding socket in the laptop.

Turn off your laptop before starting this procedure. Make sure it’s not in sleep or hibernation mode.

Use your fingers to push the slider located just under the battery on either side to unlock the battery from the laptop.

Carefully slide the battery out of the laptop frame and place it somewhere safe.

1024

Step 2

              Backplate
  • Use a Jimmy to pry off the black backplate.

Use a Jimmy to pry off the black backplate.

Step 3

              Cooling Fan
  • Remove three black 6mm Phillips #00 screws.

Remove three black 6mm Phillips #00 screws.

Step 4

  • Unplug the white connector using your fingers or a spudger.

Unplug the white connector using your fingers or a spudger.

Step 5

  • Pull out the fan by hand.

Pull out the fan by hand.

Step 6

              Charging Port
  • Use a spudger to disconnect the power cable from the motherboard.

Use a spudger to disconnect the power cable from the motherboard.

Step 7

  • Remove two 8mm Phillips #2 screws from the metal plate.
  • Use your hand to flip the metal plate so you can see the charging port fully.

Remove two 8mm Phillips #2 screws from the metal plate.

Use your hand to flip the metal plate so you can see the charging port fully.

Step 8

  • Use a spudger to pry off the charging port.

Use a spudger to pry off the charging port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    LI XU

Member since: 01/14/2020

319 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       York University, Team S1-G9, Woodhouse Winter 2020                        

                                                  Member of York University, Team S1-G9, Woodhouse Winter 2020 



                    YORK-WOODHOUSE-W20S1G9                     


                                            3 Members                     


                                            8 Guides authored