Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes

Sections

2

  • Battery
  • 5 steps
  • RAM
  • 2 steps

Flags

0

  • BackHP Pavilion 15-au123cl

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the laptop is off and unplugged before starting.
  • Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.

Make sure the laptop is off and unplugged before starting.

Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.

1024

Step 2

  • Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.

Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.

Step 3

  • Using the plastic opening tool, remove the back cover of the laptop.
  • It is recommended that you start with a corner and run the tool throughout the edges of the cover.
  • Be sure not to bend the cover by applying too much force.

Using the plastic opening tool, remove the back cover of the laptop.

It is recommended that you start with a corner and run the tool throughout the edges of the cover.

Be sure not to bend the cover by applying too much force.

Step 4

  • Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.

Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.

Step 5

  • Carefully disconnect the cable connecting the top of the battery and remove the battery.

Carefully disconnect the cable connecting the top of the battery and remove the battery.

Step 6

              RAM
  • The RAM is located at the lower middle region of the motherboard.
  • Push down on the clips on both sides of the RAM stick evenly.
  • The RAM will become loose and move upward when the clips are pushed.

The RAM is located at the lower middle region of the motherboard.

Push down on the clips on both sides of the RAM stick evenly.

The RAM will become loose and move upward when the clips are pushed.

Step 7

  • Pull the RAM stick out of the motherboard.
  • The same steps work on both sticks of RAM.

Pull the RAM stick out of the motherboard.

The same steps work on both sticks of RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Mohammad Gardezi

Member since: 10/17/2017

1,321 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team S13-G3, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S13-G3, Cagle Fall 2017 



                    USFT-CAGLE-F17S13G3                     


                                            2 Members                     


                                            6 Guides authored

Gokul Prasad Rao - Sep 8, 2018

Reply

Thanks mate….your steps are helpful <3

Can you please guide on how to buy the RAM for this laptop…my current RAM is 4GB

Im planning to upgrade to 8GB

thanks