Difficulty

Moderate

Steps

9

Time Required

                          5 - 10 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Screen
  • 6 steps

Flags

0

  • BackHP Pavilion 14-bk061st

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The screen is an important part of all laptops. Some may consider replacing the screen once issues arise during use such as cracked screens after a fall or vertical or horizontal lines sometimes caused by a loose or frayed video cable.

What you need

Step 1

              Back Panel
  • Remove the three 5.7 JIS #1 screws from the bottom of the laptop.
  • Remove the two 6.7mm JIS #1 screws from underneath the feet of the laptop close to the exhaust vent.

Remove the three 5.7 JIS #1 screws from the bottom of the laptop.

Remove the two 6.7mm JIS #1 screws from underneath the feet of the laptop close to the exhaust vent.

1024

Step 2

  • Unclip the back plate using a plastic opening tool.

Unclip the back plate using a plastic opening tool.

Step 3

  • Carefully remove the back plate from the laptop.

Carefully remove the back plate from the laptop.

Step 4

              Screen
  • Remove the five JIS #1 screws that attach the hinges of the screen to the casing of the laptop.

Remove the five JIS #1 screws that attach the hinges of the screen to the casing of the laptop.

Step 5

  • Carefully lift the hinges from the encasing and lift the bottom half of the laptop away from the screen.

Carefully lift the hinges from the encasing and lift the bottom half of the laptop away from the screen.

Step 6

  • Use the metal spudger to carefully pry off the plastic encasing around the monitor.
  • Use the outside of the screen to remove the plastic encasing to avoid damaging the screen itself.

Use the metal spudger to carefully pry off the plastic encasing around the monitor.

Use the outside of the screen to remove the plastic encasing to avoid damaging the screen itself.

Step 7

  • Remove the four JIS #1 screws holding the screen in place.

Remove the four JIS #1 screws holding the screen in place.

Step 8

  • Carefully remove the sticker covering the wire that connects the screen to the motherboard.
  • Disconnect the cable that is connected to the screen.

Carefully remove the sticker covering the wire that connects the screen to the motherboard.

Disconnect the cable that is connected to the screen.

Step 9

  • Remove the screen from the laptop.

Remove the screen from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Mehrab Daemi

Member since: 01/22/2020

596 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       York University, Team S8-G3, Turner Winter 2020                        

                                                  Member of York University, Team S8-G3, Turner Winter 2020 



                    YORK-TURNER-W20S8G3                     


                                            4 Members                     


                                            9 Guides authored