Difficulty
Easy
Steps
3
Time Required
4 - 5 minutes
Sections
1
- Back Panel
- 3 steps
Flags
0
BackHP Pavilion 14-bk061st
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The back cover’s purpose is to close up the device and stop debris from entering and possibly damaging the critical components of the device. If the back cover is broken, be very careful when moving the device as debris may easily enter and damage the laptop’s components, leading to a costly repair.
What you need
Step 1
Back Panel
- Remove the three 5.7 JIS #1 screws from the bottom of the laptop.
- Remove the two 6.7mm JIS #1 screws from underneath the feet of the laptop close to the exhaust vent.
Remove the three 5.7 JIS #1 screws from the bottom of the laptop.
Remove the two 6.7mm JIS #1 screws from underneath the feet of the laptop close to the exhaust vent.
1024
Step 2
- Unclip the back plate using a plastic opening tool.
Unclip the back plate using a plastic opening tool.
Step 3
- Carefully remove the back plate from the laptop.
Carefully remove the back plate from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Mehrab Daemi
Member since: 01/22/2020
596 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
York University, Team S8-G3, Turner Winter 2020
Member of York University, Team S8-G3, Turner Winter 2020
YORK-TURNER-W20S8G3
4 Members
9 Guides authored