Difficulty
Moderate
Steps
11
Time Required
25 - 30 minutes
Sections
1
- Keyboard
- 11 steps
Flags
0
BackHP Pavilion 13-P110NR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Remove the two rubber feet closest to the black hinge.
Remove the two rubber feet closest to the black hinge.
1024
Step 2
- Remove two 6.0 mm Philips #00 screws from the back casing.
- Remove four 5.0 mm Philips #00 screws from the back casing.
Remove two 6.0 mm Philips #00 screws from the back casing.
Remove four 5.0 mm Philips #00 screws from the back casing.
Step 3
- On the silver metal brace, remove the four 6.0 mm Phillips #00 screws.
On the silver metal brace, remove the four 6.0 mm Phillips #00 screws.
Step 4
- Lift the metal brace and remove it from the device.
Lift the metal brace and remove it from the device.
Step 5
- Unflip the lock on the wire tape and lift that end of the tape away.
- Do the same for the small white piece of tape on the circuit board.
Unflip the lock on the wire tape and lift that end of the tape away.
Do the same for the small white piece of tape on the circuit board.
Step 6
- Remove the eight 6.0 mm Philips #00 screws from the two silver holds.
Remove the eight 6.0 mm Philips #00 screws from the two silver holds.
Step 7
- Remove five 5.0 mm Philips #00 screws from the green circuit boards.
Remove five 5.0 mm Philips #00 screws from the green circuit boards.
Step 8
- Lift the white pieces up.
- Once lifted, peel the black film away to reveal a metal plate with many black glue pieces.
Lift the white pieces up.
Once lifted, peel the black film away to reveal a metal plate with many black glue pieces.
Step 9
- Using the spudger, pry each glue piece off of the metal brace. All glue pieces must be removed.
- Use caution, the pieces may fly when they are forced out.
Using the spudger, pry each glue piece off of the metal brace. All glue pieces must be removed.
Use caution, the pieces may fly when they are forced out.
Step 10
- Remove the metal plate to reveal the keyboard.
Remove the metal plate to reveal the keyboard.
Step 11
- Remove the keyboard from the device.
Remove the keyboard from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Matthew "Cole" Corson
Member since: 01/18/2018
718 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Eastern Washington University, Team S2-G5, Munoz Winter 2018
Member of Eastern Washington University, Team S2-G5, Munoz Winter 2018
EWU-MUNOZ-W18S2G5
4 Members
5 Guides authored
