Difficulty

Easy

Steps

5

Time Required

                          10 - 15 minutes

Sections

2

  • Bottom Case
  • 3 steps
  • Fan
  • 2 steps

Flags

0

  • BackHP Pavilion 11 x360

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove Screws
  • Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.
  • You must remove eleven screws.
  • Four 9mm screws with the PH0 screwdriver.
  • Seven 6mm screws with the PH0 screwdriver.

Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.

You must remove eleven screws.

Four 9mm screws with the PH0 screwdriver.

Seven 6mm screws with the PH0 screwdriver.

1024

Step 2

              Remove Backing
  • Use the spudger to pry the corners of the laptop near the display hinges.
  • Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.
  • When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!

Use the spudger to pry the corners of the laptop near the display hinges.

Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.

When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!

Step 3

              Detach Cable
  • Use the plastic opening tool to lift the white tab up at the connection.
  • Pull the cable outwards.

Use the plastic opening tool to lift the white tab up at the connection.

Pull the cable outwards.

Step 4

              Remove Screws
  • Remove the two 3mm screws with the PH0 screwdriver.

Remove the two 3mm screws with the PH0 screwdriver.

Step 5

              Disconnect Cable
  • Use your fingernails to slowly loosen the fan connection cable.
  • After the cable is slightly pulled from the connection, grab the cable and pull it outwards.

Use your fingernails to slowly loosen the fan connection cable.

After the cable is slightly pulled from the connection, grab the cable and pull it outwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 4 other contributors 


                    Natalie

Member since: 01/22/2015

934 Reputation

                                      4 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       Cal Poly, Team 19-9, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 19-9, Maness Winter 2015 



                    CPSU-MANESS-W15S19G9                     


                                            4 Members                     


                                            8 Guides authored