Hp Officejet Pro 6230 Printer Power Adaptor Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 - 15 minutes            

Sections

1

• Power Adapter
• 6 steps

Flags

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

• BackHP Officejet Pro 6230

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Adapter               

• Turn the printer around and locate the back panel for power.
• Note: If you are unsure where the panel is located, look in the back right corner. The panel has “100-240V~50/60 Hz 700 mA” inscribed on it.

Turn the printer around and locate the back panel for power.

Note: If you are unsure where the panel is located, look in the back right corner. The panel has “100-240V~50/60 Hz 700 mA” inscribed on it.

1024

Step 2

• Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.
• Note: Rotate the screw counterclockwise to loosen. Keep it in a safe place.

Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.

Note: Rotate the screw counterclockwise to loosen. Keep it in a safe place.

Step 3

• Remove the HP AC Power Adapter from the slot.

Remove the HP AC Power Adapter from the slot.

Step 4

• Locate the blue/green/red wire attached to the back of the adapter.

Locate the blue/green/red wire attached to the back of the adapter.

Step 5

• Unplug the current adapter from the wire.
• Grasp the end of the connector, not the wires, to pull it out.

Unplug the current adapter from the wire.

Grasp the end of the connector, not the wires, to pull it out.

Step 6

• Affix the new adapter to the same wire.

Affix the new adapter to the same wire.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Natalie Carmona                     

Member since: 01/28/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017                        

                                                  Member of USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 



                    USFSM-STEWART-S17S1G1                     


                                            19 Members                     


                                            17 Guides authored