Difficulty
Easy
Steps
6
Time Required
20 minutes
Sections
1
- Paper Tray
- 6 steps
Flags
0
BackHP Officejet 4630
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Paper Tray
- Begin by turning your printer upside down.
- It can be helpful to position an object beneath the printer to keep it level while you work on it.
Begin by turning your printer upside down.
It can be helpful to position an object beneath the printer to keep it level while you work on it.
1024
Step 2
- Use the T-10 screwdriver to remove the two 11-mm screws.
Use the T-10 screwdriver to remove the two 11-mm screws.
Step 3
- Pull the paper tray out until it hits the stops on either side of the tray.
Pull the paper tray out until it hits the stops on either side of the tray.
Step 4
- Lift up on one side of the black plastic bar with one hand while pulling the paper tray out of the printer with your other hand.
- The side of the tray should slide away from the printer a little bit.
Lift up on one side of the black plastic bar with one hand while pulling the paper tray out of the printer with your other hand.
The side of the tray should slide away from the printer a little bit.
Step 5
- Repeat the previous step but for the other side of the tray.
Repeat the previous step but for the other side of the tray.
Step 6
- The paper tray should now be free to slide away from the printer.
The paper tray should now be free to slide away from the printer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Tyler Allen
Member since: 01/24/2018
465 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S18-G3, Livingston Winter 2018
Member of Cal Poly, Team S18-G3, Livingston Winter 2018
CPSU-LIVINGSTON-W18S18G3
4 Members
11 Guides authored
