Difficulty

Moderate

Steps

7

Time Required

                          30 minutes - 1 hour

Sections

2

  • Back Cover
  • 4 steps
  • Charging Port
  • 3 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Mobile Thin Client mt41

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the nine screws that keep the back cover secured.
  • We recommend removing the battery first. Refer to the “Battery Replacement” guide to learn how to remove the battery.

Remove the nine screws that keep the back cover secured.

We recommend removing the battery first. Refer to the “Battery Replacement” guide to learn how to remove the battery.

1024

Step 2

  • Remove the middle plate with the iFixit opening tool.
  • May require a bit of force. If it is not coming out try the other side.

Remove the middle plate with the iFixit opening tool.

May require a bit of force. If it is not coming out try the other side.

Step 3

  • Using the iFixit opening tool, go along the seam of the back cover to pop it from its latches.
  • Gently, please! The plastic can crack.

Using the iFixit opening tool, go along the seam of the back cover to pop it from its latches.

Gently, please! The plastic can crack.

Step 4

  • Once all corners are unclasped from their latches. Gently, lift the back cover.
  • Lifting the cover should not require much force.

Once all corners are unclasped from their latches. Gently, lift the back cover.

Lifting the cover should not require much force.

Step 5

              Charging Port
  • Locate the charging port.
  • refer to the “Lower case disassembly” guide to show you how to safely remove the back of the laptop.

Locate the charging port.

refer to the “Lower case disassembly” guide to show you how to safely remove the back of the laptop.

Step 6

  • Using the screwdriver, unscrew and remove the screw located next to the charging port.
  • Gently pull out the charging port.

Using the screwdriver, unscrew and remove the screw located next to the charging port.

Gently pull out the charging port.

Step 7

  • Unplug the connector shown in the image.
  • This should not require much force.

Unplug the connector shown in the image.

This should not require much force.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Raul Rodriguez

Member since: 02/27/2018

289 Reputation

                                      3 Guides authored                  



                       Badges:
                       2

Team

                       University of North Texas, Team S2-G5, Thomas Spring 2018                        

                                                  Member of University of North Texas, Team S2-G5, Thomas Spring 2018 



                    UNT-THOMAS-S18S2G5                     


                                            5 Members                     


                                            6 Guides authored