Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

3

  • Battery
  • 2 steps
  • Disassembling HP Mini 210 Back Case
  • 3 steps
  • RAM
  • 2 steps

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackHP Mini 210

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off and unplug the netbook before replacing the battery.
  • Hold the netbook top-side down with the lid closed.
  • Slide the plastic battery release latches towards the lock symbols.
  • The left tab unlocks completely, but you will need to hold the right tab towards the lock symbol as you remove the battery.

Turn off and unplug the netbook before replacing the battery.

Hold the netbook top-side down with the lid closed.

Slide the plastic battery release latches towards the lock symbols.

The left tab unlocks completely, but you will need to hold the right tab towards the lock symbol as you remove the battery.

1024

Step 2

  • Slide the battery out from the netbook.

Slide the battery out from the netbook.

Step 3

              Disassembling HP Mini 210 Back Case
  • Turn the netbook to view its edge.
  • Press both orange eject buttons simultaneously, and use a spudger to pry off the back case.

Turn the netbook to view its edge.

Press both orange eject buttons simultaneously, and use a spudger to pry off the back case.

Step 4

  • If the back case does not separate from the netbook easily, use the spudger to pry off the back case by the edge near the battery compartment, and work your way to the sides. The case will then pivot along the front edge.

If the back case does not separate from the netbook easily, use the spudger to pry off the back case by the edge near the battery compartment, and work your way to the sides. The case will then pivot along the front edge.

Step 5

  • Pull the back case off from the front edge.

Pull the back case off from the front edge.

Step 6

              RAM
  • Push out the two plastic prongs on either side of the RAM.

Push out the two plastic prongs on either side of the RAM.

Step 7

  • The RAM should pop up allowing for easy removal from its compartment.
  • Pull out the RAM.

The RAM should pop up allowing for easy removal from its compartment.

Pull out the RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 8 other contributors 


                    Heather Freed

Member since: 10/06/2012

690 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 9-17, Amido Fall 2012                        

                                                  Member of Cal Poly, Team 9-17, Amido Fall 2012 



                    CPSU-AMIDO-F12S9G17                     


                                            3 Members                     


                                            8 Guides authored