Difficulty
Easy
Steps
9
Time Required
10 - 15 minutes
Sections
3
- Battery
- 2 steps
- Disassembling HP Mini 210 Back Case
- 3 steps
- CMOS Battery
- 4 steps
Flags
2
Missed a Step
Oops! This guide is currently missing some important steps.
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackHP Mini 210
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The CMOS battery should be replaced with a 3-volt 2032-size coin battery.
What you need
Step 1
Battery
- Turn off and unplug the netbook before replacing the battery.
- Hold the netbook top-side down with the lid closed.
- Slide the plastic battery release latches towards the lock symbols.
- The left tab unlocks completely, but you will need to hold the right tab towards the lock symbol as you remove the battery.
Turn off and unplug the netbook before replacing the battery.
Hold the netbook top-side down with the lid closed.
Slide the plastic battery release latches towards the lock symbols.
The left tab unlocks completely, but you will need to hold the right tab towards the lock symbol as you remove the battery.
1024
Step 2
- Slide the battery out from the netbook.
Slide the battery out from the netbook.
Step 3
Disassembling HP Mini 210 Back Case
- Turn the netbook to view its edge.
- Press both orange eject buttons simultaneously, and use a spudger to pry off the back case.
Turn the netbook to view its edge.
Press both orange eject buttons simultaneously, and use a spudger to pry off the back case.
Step 4
- If the back case does not separate from the netbook easily, use the spudger to pry off the back case by the edge near the battery compartment, and work your way to the sides. The case will then pivot along the front edge.
If the back case does not separate from the netbook easily, use the spudger to pry off the back case by the edge near the battery compartment, and work your way to the sides. The case will then pivot along the front edge.
Step 5
- Pull the back case off from the front edge.
Pull the back case off from the front edge.
Step 6
CMOS Battery
- Cut one side of the black adhesive ribbon on top of the CMOS battery with a utility blade.
- Be careful not to scratch or damage the battery or netbook, and be sure to keep your fingers out of the way!
Cut one side of the black adhesive ribbon on top of the CMOS battery with a utility blade.
Be careful not to scratch or damage the battery or netbook, and be sure to keep your fingers out of the way!
Step 7
- Slowly peel back the black adhesive ribbon with tweezers.
Slowly peel back the black adhesive ribbon with tweezers.
Step 8
- Pry the CMOS battery out with a plastic opening tool.
Pry the CMOS battery out with a plastic opening tool.
Step 9
- Pop the CMOS battery out.
- When reinstalling, insert the battery back into the slot with the positive terminal facing up.
Pop the CMOS battery out.
When reinstalling, insert the battery back into the slot with the positive terminal facing up.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 8 other contributors
Heather Freed
Member since: 10/06/2012
690 Reputation
8 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 9-17, Amido Fall 2012
Member of Cal Poly, Team 9-17, Amido Fall 2012
CPSU-AMIDO-F12S9G17
3 Members
8 Guides authored