Hp Mini 210 2070Nr Rtc Battery Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 minutes            

Sections

2

• Battery and Service Access Cover
• 4 steps
• RTC Battery
• 2 steps

Flags

1

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackHP Mini 210-2070NR

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery and Service Access Cover               

• Before beginning, make sure that your computer is turned off and all external power cords are disconnected.
• Close the laptop and turn it over so that the underside is up and the silver battery bay is facing towards you.

Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

Close the laptop and turn it over so that the underside is up and the silver battery bay is facing towards you.

1024

Step 2

• The battery locking latch is on the bottom right corner; slide it inward to unlock the battery.
• Slide the battery release latch inwards.
• Pull the battery towards you to remove it.

The battery locking latch is on the bottom right corner; slide it inward to unlock the battery.

Slide the battery release latch inwards.

Pull the battery towards you to remove it.

Step 3

• Slide the service access cover release lever to the right.
• While holding the lever to the right, lift up the laptop’s bottom cover gently and remove the cover.

Slide the service access cover release lever to the right.

While holding the lever to the right, lift up the laptop’s bottom cover gently and remove the cover.

Step 4

• Orient the computer as shown in the picture.

Orient the computer as shown in the picture.

Step 5

              RTC Battery               

• The RTC battery is a thin disk near the bottom left corner.
• The black and red cable is the RTC battery cable.
• Pull the RTC battery cable out of its socket.

The RTC battery is a thin disk near the bottom left corner.

The black and red cable is the RTC battery cable.

Pull the RTC battery cable out of its socket.

Step 6

• Gently pry the RTC battery upward with the plastic opening tool.
• Remove RTC battery.
• The RTC battery is attached with double sided tape.

Gently pry the RTC battery upward with the plastic opening tool.

Remove RTC battery.

The RTC battery is attached with double sided tape.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 8 other contributors 

                    Alek Linquist                     

Member since: 10/05/2012

120 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 3-23, Amido Fall 2012                        

                                                  Member of Cal Poly, Team 3-23, Amido Fall 2012 



                    CPSU-AMIDO-F12S3G23                     


                                            4 Members                     


                                            6 Guides authored