Difficulty

Easy

Steps

7

Time Required

                          9 minutes

Sections

3

  • Battery
  • 2 steps
  • Bottom Cover
  • 3 steps
  • CMOS Battery
  • 2 steps

Flags

0

  • BackHP Mini 210-1199DX

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Replace the CMOS Battery with a 3-volt 2032-size coin battery.

What you need

Step 1

              Battery
  • Unplug the netbook.
  • Secure the netbook in a upright position.
  • Slide the plastic battery latch that secures it into the netbook.
  • Keep thumb secure on the right tab as you begin to remove the battery.

Unplug the netbook.

Secure the netbook in a upright position.

Slide the plastic battery latch that secures it into the netbook.

Keep thumb secure on the right tab as you begin to remove the battery.

1024

Step 2

  • Remove the battery from the device.

Remove the battery from the device.

Step 3

              Bottom Cover
  • Press down on the two orange buttons to release.
  • If the case does not pop off, begin to use Spudger to pry the case off the back.

Press down on the two orange buttons to release.

If the case does not pop off, begin to use Spudger to pry the case off the back.

Step 4

  • Place the spudger on corners and openings in order to begin removal of the back.
  • Continue this on all corner until the case comes fully off of the back.

Place the spudger on corners and openings in order to begin removal of the back.

Continue this on all corner until the case comes fully off of the back.

Step 5

  • Pull the case off of the device

Pull the case off of the device

Step 6

              CMOS Battery
  • Simply pull the small black ribbon off of the battery with either your finger or a pair of tweezers.

Simply pull the small black ribbon off of the battery with either your finger or a pair of tweezers.

Step 7

  • Using the spudger, carefully pop the battery out of the right side as seen in the picture.
  • To reinstall, carefully place slide the battery back into place with the positive side facing upwards.

Using the spudger, carefully pop the battery out of the right side as seen in the picture.

To reinstall, carefully place slide the battery back into place with the positive side facing upwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Phillip Winston

Member since: 03/21/2017

655 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Texas Tech, Team S46-G3, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S46-G3, Bennett Spring 2017 



                    TTU-BENNETT-S17S46G3                     


                                            3 Members                     


                                            6 Guides authored