Difficulty
Moderate
Steps
7
Time Required
10 - 15 minutes
Sections
1
- Left Side Panel
- 7 steps
Flags
0
BackHP LaserJet P1102w
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Left Side Panel
- Flip printer on it’s back. Using the plastic spudger, pry off front panel. There will be two main points to focus as shown.
- Pry carefully to not break any plastic.
Flip printer on it’s back. Using the plastic spudger, pry off front panel. There will be two main points to focus as shown.
Pry carefully to not break any plastic.
1024
Step 2
- Now that the pry points are free lift up the front panel.
Now that the pry points are free lift up the front panel.
Step 3
- Unscrew the #1 Phillips screw 6mm on the back of the printer.
Unscrew the #1 Phillips screw 6mm on the back of the printer.
Step 4
- Using the plastic spudger, remove the button housing from the top left of printer.
- Pry carefully to not break any plastic.
Using the plastic spudger, remove the button housing from the top left of printer.
Step 5
- Once the housing is removed, remove the three buttons.
Once the housing is removed, remove the three buttons.
Step 6
- Use the plastic spudger to remove the side panel. There are three main prying points as shown.
- Pry carefully to not break any plastic.
Use the plastic spudger to remove the side panel. There are three main prying points as shown.
Step 7
- With all pry points free, remove the side panel.
With all pry points free, remove the side panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jerome Etten
Member since: 10/04/2018
571 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
UW Stout, Team S6-G4, Ogden Fall 2018
Member of UW Stout, Team S6-G4, Ogden Fall 2018
UWSTOUT-OGDEN-F18S6G4
4 Members
5 Guides authored