Difficulty

Easy

Steps

10

Time Required

                          50 minutes

Sections

8

  • Left Side Cover
  • 1 step
  • Right Side Cover
  • 1 step
  • Back Cover
  • 1 step
  • Top Cover
  • 2 steps
  • Fan
  • 2 steps
  • Duplexer PCB
  • 1 step
  • Duplexer Gears
  • 1 step
  • Duplexer Solenoid
  • 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHP LaserJet 1160/1320

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Left Side Cover
  • Pull on the two tabs on the back of the printer to release the left side cover.
  • Remove the cover by rotating it towards the front of the printer.

Pull on the two tabs on the back of the printer to release the left side cover.

Remove the cover by rotating it towards the front of the printer.

1024

Step 2

              Right Side Cover
  • With the printer turned so that the right side is facing upwards, use a metal spudger to disengage 3 tabs holding the right side cover in place.
  • Lift the cover off of the printer.

With the printer turned so that the right side is facing upwards, use a metal spudger to disengage 3 tabs holding the right side cover in place.

Lift the cover off of the printer.

Step 3

              Back Cover
  • Remove 4 screws on the back of the printer.
  • Remove the back cover.

Remove 4 screws on the back of the printer.

Remove the back cover.

Step 4

              Top Cover
  • Remove 2 screws on the back of the printer, one on the left, and one on the front.
  • The second image shows the formatter removed, but it is not necessary to remove the formatter to replace the top cover.

Remove 2 screws on the back of the printer, one on the left, and one on the front.

The second image shows the formatter removed, but it is not necessary to remove the formatter to replace the top cover.

Step 5

              Top Cover
  • Disconnect the control panel cable and remove the top cover.

Disconnect the control panel cable and remove the top cover.

Step 6

              Fan
  • Disconnect the fan cable from the main board of the printer.
  • Remove the retaining clip holding the fan in.
  • Remove the 2 screws holding the fan in.

Disconnect the fan cable from the main board of the printer.

Remove the retaining clip holding the fan in.

Remove the 2 screws holding the fan in.

Step 7

              Fan Cable
  • Remove the fan cable from the cable guide.

Remove the fan cable from the cable guide.

Step 8

              Duplexer PCB
  • Disconnect one cable from the main board of the printer.
  • Disconnect the duplexer solenoid cable from the duplexer PCB.
  • Remove one screw on the duplexer PCB and remove the PCB from the printer.

Disconnect one cable from the main board of the printer.

Disconnect the duplexer solenoid cable from the duplexer PCB.

Remove one screw on the duplexer PCB and remove the PCB from the printer.

Step 9

              Duplexer Gears
  • Remove 3 screws holding the duplexer gears to the printer and remove the gears.

Remove 3 screws holding the duplexer gears to the printer and remove the gears.

Step 10

              Duplexer Solenoid
  • Remove one screw to remove the solenoid from the printer.

Remove one screw to remove the solenoid from the printer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                    jdp23

Member since: 08/22/2013

1,275 Reputation

                                      23 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges