Hp Hdx 16 1160Us Wifi Card Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          2 - 3 minutes            

Sections

2

• Battery
• 3 steps
• Wifi Card
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP HDX 16-1160US

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Turn the device over so that the bottom side is facing up and the battery is facing away from you.

Turn the device over so that the bottom side is facing up and the battery is facing away from you.

1024

Step 2

• Locate the slider under the right side of the battery.
• Using your thumb, slide it all the way to the left until the front of the battery lifts up.

Locate the slider under the right side of the battery.

Using your thumb, slide it all the way to the left until the front of the battery lifts up.

Step 3

• With your thumb still holding the slider to the left, use the opposite hand to lift the battery out, removing it from the computer.

With your thumb still holding the slider to the left, use the opposite hand to lift the battery out, removing it from the computer.

Step 4

              Wifi Card               

• Use the Phillips #1 Screw Driver to unscrew the 6mm screw from the Wi-Fi Card Panel.
• The 6mm screw will remain in the Wi-Fi card panel and will not fall out.
• Lift off the Wi-Fi card panel off using the opposite hand.

Use the Phillips #1 Screw Driver to unscrew the 6mm screw from the Wi-Fi Card Panel.

The 6mm screw will remain in the Wi-Fi card panel and will not fall out.

Lift off the Wi-Fi card panel off using the opposite hand.

Step 5

• Remove the gray and black wires by gently pulling up on them so that they “unsnap” from the Wi-Fi card.

Remove the gray and black wires by gently pulling up on them so that they “unsnap” from the Wi-Fi card.

Step 6

• Remove the two 4mm screws with the Phillips #1 screw driver.

Remove the two 4mm screws with the Phillips #1 screw driver.

Step 7

• Carefully use the plastic opening tools to lift the Wi-Fi card up on the left side.
• Using the opposite hand, pull the Wi-Fi card to the left.
• Do not lift the Wi-Fi card straight up, this will damage or break the Wi-Fi card.

Carefully use the plastic opening tools to lift the Wi-Fi card up on the left side.

Using the opposite hand, pull the Wi-Fi card to the left.

Do not lift the Wi-Fi card straight up, this will damage or break the Wi-Fi card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Marshall Reid                     

Member since: 04/14/2014

527 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 12-38, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 12-38, Maness Spring 2014 



                    CPSU-MANESS-S14S12G38                     


                                            4 Members                     


                                            5 Guides authored