Difficulty
Easy
Steps
5
Time Required
5 - 15 minutes
Sections
1
- Wi-Fi Card
- 5 steps
Flags
0
BackHP G71t-300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wi-Fi Card
- Ground yourself by either touching an unpainted metal surface or by using the Anti-Static wrist strap.
- Turn off the computer and remove the charger from the charging port.
- Turn the laptop over and slide the battery release catch to the right. The battery will pop up from its slot. Remove the battery using your fingers.
Ground yourself by either touching an unpainted metal surface or by using the Anti-Static wrist strap.
Turn off the computer and remove the charger from the charging port.
Turn the laptop over and slide the battery release catch to the right. The battery will pop up from its slot. Remove the battery using your fingers.
1024
Step 2
- Remove the 6mm screw from the cover above the battery using a Phillips #0 screwdriver.
Remove the 6mm screw from the cover above the battery using a Phillips #0 screwdriver.
Step 3
- Pull off the bottom cover to reveal the Wi-Fi card.
Pull off the bottom cover to reveal the Wi-Fi card.
Step 4
- Gently remove the 2 cables clips to avoid damage.
- Remove the 3mm screw holding the Wi-Fi module using a Phillips #0 screwdriver.
Gently remove the 2 cables clips to avoid damage.
Remove the 3mm screw holding the Wi-Fi module using a Phillips #0 screwdriver.
Step 5
- Gently pull the module out of the slot.
Gently pull the module out of the slot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Cecil Lam
Member since: 09/22/2016
113 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
UC Davis, Team 2-3, Oliver Fall 2016
Member of UC Davis, Team 2-3, Oliver Fall 2016
UCD-OLIVER-F16S2G3
5 Members
6 Guides authored
