Hp G62 347Nr Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 minutes            

Sections

1

• Keyboard
• 7 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackHP G62 347NR

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard               

• Make sure the device is turned off before removing the battery to avoid loss or corruption of files.
• Turn the device over so the bottom is facing up.
• Slide the battery release to the left until you hear a click.
• Once you hear a click, the battery will have been released from the battery compartment.

Make sure the device is turned off before removing the battery to avoid loss or corruption of files.

Turn the device over so the bottom is facing up.

Slide the battery release to the left until you hear a click.

Once you hear a click, the battery will have been released from the battery compartment.

1024

Step 2

• Remove the battery, carefully, from the compartment.

Remove the battery, carefully, from the compartment.

Step 3

• Find the hard drive compartment with two Phillips head screws.
• Use the PH1 screwdriver to loosen and remove both screws.
• Gently remove the hard drive compartment.

Find the hard drive compartment with two Phillips head screws.

Use the PH1 screwdriver to loosen and remove both screws.

Gently remove the hard drive compartment.

Step 4

• Locate the three Phillips head screws on the compartment with the wifi and keyboard logos.
• Using the Phillips #1 screwdriver, remove the three screws.

Locate the three Phillips head screws on the compartment with the wifi and keyboard logos.

Using the Phillips #1 screwdriver, remove the three screws.

Step 5

• Locate the two keyboard logos on back of the computer.
• Find the Phillips head screws in the hole next to the logo.
• Remove the two screws using a Phillips #1 screwdriver.

Locate the two keyboard logos on back of the computer.

Find the Phillips head screws in the hole next to the logo.

Remove the two screws using a Phillips #1 screwdriver.

Step 6

• In the battery compartment, locate the three keyboard logos.
• Find the Phillips head screws next to each logo.
• Remove the three screws using the Phillips #1 screwdriver.

In the battery compartment, locate the three keyboard logos.

Find the Phillips head screws next to each logo.

Remove the three screws using the Phillips #1 screwdriver.

Step 7

• Place the plastic opening tool between the keyboard and the motherboard.
• Gently pry the entire keyboard up and away from the laptop’s motherboard.
• Once you have part of the keyboard separated, run your fingers around the edge of the keyboard to separate the entire thing.

Place the plastic opening tool between the keyboard and the motherboard.

Gently pry the entire keyboard up and away from the laptop’s motherboard.

Once you have part of the keyboard separated, run your fingers around the edge of the keyboard to separate the entire thing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    McKenzi Morris                     

Member since: 10/10/2016

487 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Texas Tech, Team 6-1, Bennett Fall 2016                        

                                                  Member of Texas Tech, Team 6-1, Bennett Fall 2016 



                    TTU-BENNETT-F16S6G1                     


                                            3 Members                     


                                            3 Guides authored