Difficulty

Easy

Steps

6

Time Required

                          10 minutes

Sections

2

  • Battery
  • 2 steps
  • Wireless Card
  • 4 steps

Flags

0

  • BackHP G62-223CL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Removal
  • Removing the battery while the laptop is still on may corrupt your files.
  • Turn the device over to expose the bottom of the device.
  • Slide the battery release all the way to the left.
  • There will be a click and the battery will be released from its compartment.

Removing the battery while the laptop is still on may corrupt your files.

Turn the device over to expose the bottom of the device.

Slide the battery release all the way to the left.

There will be a click and the battery will be released from its compartment.

1024

Step 2

  • Carefully remove the battery from its compartment.

Carefully remove the battery from its compartment.

Step 3

              Wireless Card
  • Locate three Phillips head retaining screws which secure the compartment.
  • Use a Phillips #0 screwdriver to loosen the retaining screws.
  • Remove the panel covering the compartment.
  • Ground yourself before attempting to touch any components. To ground yourself, touch a conductive metal to eliminate any static buildup in your body, which can damage computer components.

Locate three Phillips head retaining screws which secure the compartment.

Use a Phillips #0 screwdriver to loosen the retaining screws.

Remove the panel covering the compartment.

Ground yourself before attempting to touch any components. To ground yourself, touch a conductive metal to eliminate any static buildup in your body, which can damage computer components.

Step 4

  • Use tweezers to disconnect the gray cable and the black cable from the wireless card.

Use tweezers to disconnect the gray cable and the black cable from the wireless card.

Step 5

  • Use a Phillips #0 screwdriver to remove the single 4mm screw from the corner of the wireless card.

Use a Phillips #0 screwdriver to remove the single 4mm screw from the corner of the wireless card.

Step 6

  • Carefully lift and pull wireless card. It is removed!

Carefully lift and pull wireless card. It is removed!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Garret Layton

Member since: 01/13/2015

645 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 1-4, Sullivan Winter 2015                        

                                                  Member of USF Tampa, Team 1-4, Sullivan Winter 2015 



                    USFT-SULLIVAN-W15S1G4                     


                                            4 Members                     


                                            5 Guides authored