Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Hard Drive
- 4 steps
Flags
0
BackHP G62-223CL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Removal
- Removing the battery while the laptop is still on may corrupt your files.
- Turn the device over to expose the bottom of the device.
- Slide the battery release all the way to the left.
- There will be a click and the battery will be released from its compartment.
Removing the battery while the laptop is still on may corrupt your files.
Turn the device over to expose the bottom of the device.
Slide the battery release all the way to the left.
There will be a click and the battery will be released from its compartment.
1024
Step 2
- Carefully remove the battery from its compartment.
Carefully remove the battery from its compartment.
Step 3
Hard Drive
- Locate the two Phillips head retaining screws which secure the hard drive compartment.
- Use a Phillips #0 screwdriver to loosen the retaining screws.
- Remove the panel covering the compartment.
- Ground yourself before attempting to touch any components. To ground yourself, touch a conductive metal to eliminate any static buildup in your body, which can damage computer components.
Locate the two Phillips head retaining screws which secure the hard drive compartment.
Use a Phillips #0 screwdriver to loosen the retaining screws.
Remove the panel covering the compartment.
Ground yourself before attempting to touch any components. To ground yourself, touch a conductive metal to eliminate any static buildup in your body, which can damage computer components.
Step 4
- Locate the three 6 mm Phillips head screws for the hard drive.
- Use a Phillips #0 screwdriver to remove the screws.
Locate the three 6 mm Phillips head screws for the hard drive.
Use a Phillips #0 screwdriver to remove the screws.
Step 5
- Remove the hard drive from the compartment.
- Pull the connector cable from the end of the hard drive.
Remove the hard drive from the compartment.
Pull the connector cable from the end of the hard drive.
Step 6
- Locate the two 6 mm Phillips head screws on each side of the hard drive.
- Use a Phillips #0 screwdriver to remove the screws.
- Remove the cover from the hard drive.
Locate the two 6 mm Phillips head screws on each side of the hard drive.
Remove the cover from the hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Garret Layton
Member since: 01/13/2015
645 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 1-4, Sullivan Winter 2015
Member of USF Tampa, Team 1-4, Sullivan Winter 2015
USFT-SULLIVAN-W15S1G4
4 Members
5 Guides authored