Hp G60T 600 Cto Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 - 35 minutes

Sections

Battery
3 steps
Keyboard
4 steps

Flags

BackHP G60T-600 CTO
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Failure to remove the battery before performing any replacement guide may result in electric shock.
Close your device, then turn it over.

Failure to remove the battery before performing any replacement guide may result in electric shock.

Close your device, then turn it over.

1024

Step 2

Place your index finger on the ridged tab.

Place your index finger on the ridged tab.

Step 3

Apply moderate pressure to the tab and slide it to the right.
While the tab is on the right, you should be able to gently slide your battery out of your device.

Apply moderate pressure to the tab and slide it to the right.

While the tab is on the right, you should be able to gently slide your battery out of your device.

Step 4

              Keyboard

Unscrew the following 5mm screws with a #0 Phillips screwdriver.

Unscrew the following 5mm screws with a #0 Phillips screwdriver.

Step 5

Turn your laptop over and open it up.
Grip your laptop firmly from both sides and use your thumbs to slide the keyboard towards the screen.

Turn your laptop over and open it up.

Grip your laptop firmly from both sides and use your thumbs to slide the keyboard towards the screen.

Step 6

Pull up on the top of your keyboard with medium force. It should start to pop out.
A plastic opening tool may facilitate this task.
Run your hands underneath the edges of the keyboard until it is free from the device.
Do not pull hard to take the keyboard out. There is a small connection that needs to be undone.

Pull up on the top of your keyboard with medium force. It should start to pop out.

A plastic opening tool may facilitate this task.

Run your hands underneath the edges of the keyboard until it is free from the device.

Do not pull hard to take the keyboard out. There is a small connection that needs to be undone.

Step 7

Place your thumbs on the two small, white tabs.
Push these tabs forward to release the connection and free the keyboard from the device.

Place your thumbs on the two small, white tabs.

Push these tabs forward to release the connection and free the keyboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Dominic DeSantis

Member since: 10/19/2016

748 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       UMass Dartmouth, Team 4-5, Catania Fall 2016                        

                                                  Member of UMass Dartmouth, Team 4-5, Catania Fall 2016 



                    UMASSD-CATANIA-F16S4G5                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team