Difficulty
Moderate
Steps
7
Time Required
15 minutes
Sections
2
- Battery
- 4 steps
- Keyboard
- 3 steps
Flags
0
BackHP Flyer Red
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure your laptop is powered off.
- With laptop closed flip to look at the underside of the laptop.
Make sure your laptop is powered off.
With laptop closed flip to look at the underside of the laptop.
1024
Step 2
- On the underside of the laptop towards the hinge for the screen there are two rectangular slide switches located inside of rectangular tracks.
On the underside of the laptop towards the hinge for the screen there are two rectangular slide switches located inside of rectangular tracks.
Step 3
- The left switch is the battery unlock switch.
- Inside the rectangular track of this switch there is an image of a closed lock that should be visible. Push this switch to the other end of the track and an image of an open lock should be visible.
The left switch is the battery unlock switch.
Inside the rectangular track of this switch there is an image of a closed lock that should be visible. Push this switch to the other end of the track and an image of an open lock should be visible.
Step 4
- Then take and slide the other switch to the other end of its track which will pop out the battery.
- Grab the battery and pull it out of the slot.
Then take and slide the other switch to the other end of its track which will pop out the battery.
Grab the battery and pull it out of the slot.
Step 5
Keyboard
- Next locate and unscrew the two 4mm Phllips #1 screws with the keyboard symbol located towards the middle and top of the bottom of the laptop.
Next locate and unscrew the two 4mm Phllips #1 screws with the keyboard symbol located towards the middle and top of the bottom of the laptop.
Step 6
- Next turn the laptop over and flip open the screen.
- Use the plastic opening tool to pry the keyboard upwards from the bottom right hand corner of the keyboard.
- Use another plastic opening tool with the first plastic opening tool you placed to undo every plastic clasp surrounding the keyboard.
Next turn the laptop over and flip open the screen.
Use the plastic opening tool to pry the keyboard upwards from the bottom right hand corner of the keyboard.
Use another plastic opening tool with the first plastic opening tool you placed to undo every plastic clasp surrounding the keyboard.
Step 7
- Next lift up the keyboard gently and use the plastic opening tool to undo the ribbon wire by unclasping the ZIF (zero insertion force) connector to the laptop.
- Gently slide the ribbon wire out of its slot.
Next lift up the keyboard gently and use the plastic opening tool to undo the ribbon wire by unclasping the ZIF (zero insertion force) connector to the laptop.
Gently slide the ribbon wire out of its slot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 2 other contributors
Anthony Ciotti
Member since: 04/07/2016
747 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 4-5, Catania Spring 2016
Member of UMass Dartmouth, Team 4-5, Catania Spring 2016
UMASSD-CATANIA-S16S4G5
4 Members
5 Guides authored
