Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Volume Buttons
- 5 steps
Flags
0
BackHP eStation Zeen
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Volume Buttons
- Use a metal spudger to remove the four screw caps.
- Remove the four 6 mm screws using a Philips #0 screwdriver.
Use a metal spudger to remove the four screw caps.
Remove the four 6 mm screws using a Philips #0 screwdriver.
1024
Step 2
- Insert a plastic opening tool and slide it along the edge to open the back panel.
- Lift the back panel away from the device.
Insert a plastic opening tool and slide it along the edge to open the back panel.
Lift the back panel away from the device.
Step 3
- Disconnect the battery clip with a plastic opening tool.
- Be gentle as the connector is fragile.
Disconnect the battery clip with a plastic opening tool.
Be gentle as the connector is fragile.
Step 4
- Remove the two 6 mm screws using a Philips #0 screwdriver.
Remove the two 6 mm screws using a Philips #0 screwdriver.
Step 5
- Pull the ribbon from the board.
- Be gentle as the ribbon is fragile.
Pull the ribbon from the board.
Be gentle as the ribbon is fragile.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
dalton hale
Member since: 09/26/2016
488 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 16-4, Eyestone Fall 2016
Member of USF Tampa, Team 16-4, Eyestone Fall 2016
USFT-EYESTONE-F16S16G4
4 Members
10 Guides authored