Difficulty

Moderate

Steps

10

Time Required

                          5 minutes

Sections

3

  • Bottom Cover
  • 4 steps
  • Battery
  • 3 steps
  • RAM
  • 3 steps

Flags

0

  • BackHP Envy x360 m6-aq103dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover
  • Flip the laptop over to expose the underside.
  • Remove the two grip pads with blue plastic opening tool by inserting the tool between the laptop and the pads and slowly lifting up.
  • The grip pads are tacky, remove slowly to avoid separating the adhesive.

Flip the laptop over to expose the underside.

Remove the two grip pads with blue plastic opening tool by inserting the tool between the laptop and the pads and slowly lifting up.

The grip pads are tacky, remove slowly to avoid separating the adhesive.

1024

Step 2

  • Remove the two 8 mm Phillips Head screws that were under the grip pads using a Phillip’s Head 1 Screwdriver.

Remove the two 8 mm Phillips Head screws that were under the grip pads using a Phillip’s Head 1 Screwdriver.

Step 3

  • Remove the six 5 mm Torx screws using a T5 Torx Screwdriver.

Remove the six 5 mm Torx screws using a T5 Torx Screwdriver.

Step 4

  • Use the nylon spudger to pop off the bottom cover by inserting it into the heat vent and twisting to the left or right.
  • You may hear a slight clicking or popping, but that is normal.

Use the nylon spudger to pop off the bottom cover by inserting it into the heat vent and twisting to the left or right.

You may hear a slight clicking or popping, but that is normal.

Step 5

              Battery
  • Use the Phillips Head 1 Screwdriver to remove the six 4 mm screws.

Use the Phillips Head 1 Screwdriver to remove the six 4 mm screws.

Step 6

  • Disconnect the battery port from the motherboard by gently lifting it on both sides with the plastic opening tool.
  • Lift up the port with the tool.

Disconnect the battery port from the motherboard by gently lifting it on both sides with the plastic opening tool.

Lift up the port with the tool.

Step 7

  • Lift the battery out of the laptop with your hands.

Lift the battery out of the laptop with your hands.

Step 8

              RAM
  • Make sure you are wearing an anti-static wrist strap.
  • Remove the ram’s metal cover with your hand.

Make sure you are wearing an anti-static wrist strap.

Remove the ram’s metal cover with your hand.

Step 9

  • Pull the two outer pins on either side of the ram chip outward with your hands.
  • The ram chips should pop up.
  • Do this for both chips.

Pull the two outer pins on either side of the ram chip outward with your hands.

The ram chips should pop up.

Do this for both chips.

Step 10

  • Remove the chips one at a time, by sliding them towards the side of the computer they are pointing towards.

Remove the chips one at a time, by sliding them towards the side of the computer they are pointing towards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Joey Chen

Member since: 10/02/2017

313 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S4-G3, Livingston Fall 2017                        

                                                  Member of Cal Poly, Team S4-G3, Livingston Fall 2017 



                    CPSU-LIVINGSTON-F17S4G3                     


                                            4 Members                     


                                            9 Guides authored