Difficulty

Moderate

Steps

18

Time Required

                          40 minutes - 1 hour

Sections

5

  • Battery
  • 5 steps
  • Cooling Fan
  • 4 steps
  • Motherboard
  • 3 steps
  • Speakers
  • 1 step
  • Display
  • 5 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Envy x360 15m-bq021dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo using a Phillips #0 screwdriver.
  • Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.

On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo using a Phillips #0 screwdriver.

Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.

1024

Step 2

  • To remove the back cover, use the black spudger to lift up on the edges of the cover.
  • Use a suction cup to assist in lifting the back cover

To remove the back cover, use the black spudger to lift up on the edges of the cover.

Use a suction cup to assist in lifting the back cover

Step 3

  • Use the Philips #0 screwdriver to remove six (6) M2.0x3.2 screws from battery.

Use the Philips #0 screwdriver to remove six (6) M2.0x3.2 screws from battery.

Step 4

  • Using the Philips #0 screwdriver, remove the final screw from the battery connected to the SSD storage unit.

Using the Philips #0 screwdriver, remove the final screw from the battery connected to the SSD storage unit.

Step 5

  • Lift and pull the front of the battery up and out (away from the connector) to remove.

Lift and pull the front of the battery up and out (away from the connector) to remove.

Step 6

              Cooling Fan
  • Using a Philips #0 screwdriver, remove the three M2x4 screws located around the cooling fan as shown in this picture.
  • Be careful as the fan might be sharp in some places when removing it.

Using a Philips #0 screwdriver, remove the three M2x4 screws located around the cooling fan as shown in this picture.

Be careful as the fan might be sharp in some places when removing it.

Step 7

  • Remove the connector clip with the tweezers.

Remove the connector clip with the tweezers.

Step 8

  • Remove the four spring loaded screws with a Philips #1 screwdriver.

Remove the four spring loaded screws with a Philips #1 screwdriver.

Step 9

  • Remove the cooling fan.

Remove the cooling fan.

Step 10

              Motherboard
  • Using a Phillips #1, remove the seven M2.0x3.2 screws.
  • Undo the six connections using the blue opening tool.

Using a Phillips #1, remove the seven M2.0x3.2 screws.

Undo the six connections using the blue opening tool.

Step 11

  • Carefully remove the aux port from the frame of the computer as shown.

Carefully remove the aux port from the frame of the computer as shown.

Step 12

  • Pull the mother board up and away from frame of the computer.

Pull the mother board up and away from frame of the computer.

Step 13

              Speakers
  • Use the tweezers to remove the cords from their restraints.
  • Lift the speakers out of the laptop.

Use the tweezers to remove the cords from their restraints.

Lift the speakers out of the laptop.

Step 14

              Display
  • Remove the three 4.4 mm screws from each hinge using a Phillips #0 screwdriver.

Remove the three 4.4 mm screws from each hinge using a Phillips #0 screwdriver.

Step 15

  • Lift the hinges with the spudger.

Lift the hinges with the spudger.

Step 16

  • Use the spudger to detach the the screen from the display.

Use the spudger to detach the the screen from the display.

Step 17

  • Slowly remove the tape.

Slowly remove the tape.

Step 18

  • Disconnect the wire from the ports and take out the white sheet.

Disconnect the wire from the ports and take out the white sheet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Richard Donald Battel

Member since: 09/21/2021

306 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       The Citadel Military College of South Carolina, Team 3-23, Eggleston Fall 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team 3-23, Eggleston Fall 2021 



                    CMCSC-EGGLESTON-F21S3G23                     


                                            3 Members                     


                                            3 Guides authored