Difficulty

Easy

Steps

7

Time Required

                          15 - 30 minutes

Sections

3

  • Back Panel
  • 2 steps
  • Battery
  • 2 steps
  • Hard Drive
  • 3 steps

Flags

0

  • BackHP Envy x360 15m-bp111dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Be sure that your laptop is powered off, you’re disconnected from the power adapter, and that the components have cooled before beginning this replacement.

For more troubleshooting information for the Hard Drive, follow the instructions on the troubleshooting page.

What you need

Step 1

              Back Panel
  • Remove the rubber feet to access the screws.
  • Using a Phillips #0 screwdriver, remove the four 7 mm screws.
  • Using a T5 Torx screwdriver, remove the three 5 mm screws.

Remove the rubber feet to access the screws.

Using a Phillips #0 screwdriver, remove the four 7 mm screws.

Using a T5 Torx screwdriver, remove the three 5 mm screws.

1024

Step 2

  • Insert opening picks or an opening tool inside the edge of the chassis to separate the back panel from the rest of the computer.
  • You may hear snapping as the clips are released while you work your way around the perimeter of the computer. This is normal.
  • Remove the back case.

Insert opening picks or an opening tool inside the edge of the chassis to separate the back panel from the rest of the computer.

You may hear snapping as the clips are released while you work your way around the perimeter of the computer. This is normal.

Remove the back case.

Step 3

              Battery
  • Use a Phillips screwdriver to remove the seven 4 mm screws securing the battery.

Use a Phillips screwdriver to remove the seven 4 mm screws securing the battery.

Step 4

  • Carefully lift the battery, and pull it towards you to remove it.

Carefully lift the battery, and pull it towards you to remove it.

Step 5

              Hard Drive
  • The hard drive bay is located in the lower left corner of the computer.
  • The hard drive will be covered by a black rubber sheath which can be removed by simply pulling it off of the hard drive (not pictured).

The hard drive bay is located in the lower left corner of the computer.

The hard drive will be covered by a black rubber sheath which can be removed by simply pulling it off of the hard drive (not pictured).

Step 6

  • Pull the rubber casing away from the drive (not pictured here) and gently lift the hard drive out of the computer.
  • Unplug the drive from power by grabbing the SATA / power cable on the plastic edge and pulling it away from the drive.
  • Do not disconnect the ribbon cable from the motherboard.

Pull the rubber casing away from the drive (not pictured here) and gently lift the hard drive out of the computer.

Unplug the drive from power by grabbing the SATA / power cable on the plastic edge and pulling it away from the drive.

Do not disconnect the ribbon cable from the motherboard.

Step 7

  • The hard drive is now removed and can be replaced.

The hard drive is now removed and can be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Ross Snead

Member since: 02/22/2022

153 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Clemson, Team 2-2, Hunter Spring 2022                        

                                                  Member of Clemson, Team 2-2, Hunter Spring 2022 



                    CLEM-HUNTER-S22S2G2                     


                                            5 Members                     


                                            6 Guides authored