Hp Envy X360 15M Bp111Dx Cooling Fan Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 - 40 minutes

Sections

Back Panel
2 steps
Cooling Fan
6 steps

Flags

BackHP Envy x360 15m-bp111dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Before using this guide, ensure that the venting holes on the back of the laptop are clear of dust and debris. Typically, you can remove dust and buildup with a small dust blower. Restart the machine to ensure the fan is still clicking.

The final step requires you to re-apply thermal paste onto the CPU. If you skip this step, you will almost certainly damage your machine.

Be sure that your laptop is powered off, disconnected from the power adapter, and that the components have cooled before beginning this replacement guide.

What you need

Step 1

              Back Panel

Remove the rubber feet to access the screws.
Using a Phillips #0 screwdriver, remove the four 7 mm screws.
Using a T5 Torx screwdriver, remove the three 5 mm screws.

Remove the rubber feet to access the screws.

Using a Phillips #0 screwdriver, remove the four 7 mm screws.

Using a T5 Torx screwdriver, remove the three 5 mm screws.

1024

Step 2

Insert opening picks or an opening tool inside the edge of the chassis to separate the back panel from the rest of the computer.
You may hear snapping as the clips are released while you work your way around the perimeter of the computer. This is normal.
Remove the back case.

Insert opening picks or an opening tool inside the edge of the chassis to separate the back panel from the rest of the computer.

You may hear snapping as the clips are released while you work your way around the perimeter of the computer. This is normal.

Remove the back case.

Step 3

              Cooling Fan

Remove the three 4 mm fan screws using a Phillips screwdriver.

Remove the three 4 mm fan screws using a Phillips screwdriver.

Step 4

Loosen the screws on the heatsink using the Phillips screwdriver.
Do not force the screws to come out of the heatsink; they are meant to stay in place.

Loosen the screws on the heatsink using the Phillips screwdriver.

Do not force the screws to come out of the heatsink; they are meant to stay in place.

Step 5

Remove the tape from the heat sink by pulling upwards.

Remove the tape from the heat sink by pulling upwards.

Step 6

Using the halberd spudger, remove the sliding connector directly beside the fan.

Using the halberd spudger, remove the sliding connector directly beside the fan.

Step 7

Lift the fan assembly from the computer to remove it.

Lift the fan assembly from the computer to remove it.

Step 8

Replace the thermal paste on the processor using the following guide.

Replace the thermal paste on the processor using the following guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Eli Porter

Member since: 02/22/2022

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Clemson, Team 2-2, Hunter Spring 2022                        

                                                  Member of Clemson, Team 2-2, Hunter Spring 2022 



                    CLEM-HUNTER-S22S2G2                     


                                            5 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team