Difficulty
Very easy
Steps
2
Time Required
2 - 5 minutes
Sections
1
- Back Panel
- 2 steps
Flags
0
BackHP Envy x360 15m-bp111dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Be sure that your laptop is powered off, it’s disconnected from the power adapter and that the components have cooled down before beginning the removal process.
What you need
Step 1
Back Panel
- Remove the rubber feet to access the screws.
- Using a Phillips #0 screwdriver, remove the four 7 mm screws.
- Using a T5 Torx screwdriver, remove the three 5 mm screws.
Remove the rubber feet to access the screws.
Using a Phillips #0 screwdriver, remove the four 7 mm screws.
Using a T5 Torx screwdriver, remove the three 5 mm screws.
1024
Step 2
- Insert opening picks or an opening tool inside the edge of the chassis to separate the back panel from the rest of the computer.
- You may hear snapping as the clips are released while you work your way around the perimeter of the computer. This is normal.
- Remove the back case.
Insert opening picks or an opening tool inside the edge of the chassis to separate the back panel from the rest of the computer.
You may hear snapping as the clips are released while you work your way around the perimeter of the computer. This is normal.
Remove the back case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Jack Bjelland
Member since: 02/22/2022
177 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
Clemson, Team 2-2, Hunter Spring 2022
Member of Clemson, Team 2-2, Hunter Spring 2022
CLEM-HUNTER-S22S2G2
5 Members
6 Guides authored