Hp Envy X360 15 U473Cl Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 - 30 minutes

Sections

Battery
7 steps

Flags

BackHP Envy x360 15-u473cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Power off your laptop before beginning disassembly.
Pry off the 2 rear rubber pads (closest to the laptop hinge) using the plastic opening tool to reveal two screws.
Remove the 2 anti-tamper proof covers using the spudger to reveal two screws.

Power off your laptop before beginning disassembly.

Pry off the 2 rear rubber pads (closest to the laptop hinge) using the plastic opening tool to reveal two screws.

Remove the 2 anti-tamper proof covers using the spudger to reveal two screws.

1024

Step 2

Remove the fourteen 7mm screws using the Phillips #0 screwdriver from the bottom of the laptop.

Remove the fourteen 7mm screws using the Phillips #0 screwdriver from the bottom of the laptop.

Step 3

Turn the device right side up and open the lid.
Insert the plastic opening tool in between the keyboard plate and the base of laptop.
Run the tool along seem, prying up as you go.
Separate the keyboard plate from the base, lifting from the front.

Turn the device right side up and open the lid.

Insert the plastic opening tool in between the keyboard plate and the base of laptop.

Run the tool along seem, prying up as you go.

Separate the keyboard plate from the base, lifting from the front.

Step 4

There are 3 ribbon cables (black, white, and copper color) connecting the computer to the keyboard plate. Disconnect the 3 ribbon cables using the plastic opening tool by prying up the latches holding each cable in place.
Remove the keyboard plate from the device.

There are 3 ribbon cables (black, white, and copper color) connecting the computer to the keyboard plate. Disconnect the 3 ribbon cables using the plastic opening tool by prying up the latches holding each cable in place.

Remove the keyboard plate from the device.

Step 5

Remove the thick white ribbon cable covering the battery using the plastic opening tool by prying up the latches attaching each end.

Remove the thick white ribbon cable covering the battery using the plastic opening tool by prying up the latches attaching each end.

Step 6

Remove the three 4mm screws using the Phillips #0 screwdriver.

Remove the three 4mm screws using the Phillips #0 screwdriver.

Step 7

Disconnect the battery from the motherboard.
There may be tamper-proof tape holding the battery in place. Remove the tape if present.
Remove the battery from the device.

Disconnect the battery from the motherboard.

There may be tamper-proof tape holding the battery in place. Remove the tape if present.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Maximillian McDonald

Member since: 01/13/2018

760 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Eastern Washington University, Team S1-G2, Ramos Winter 2018                        

                                                  Member of Eastern Washington University, Team S1-G2, Ramos Winter 2018 



                    EWU-RAMOS-W18S1G2                     


                                            5 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team