Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
1
- Battery
- 5 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackHP Envy Ultrabook 4-1043cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop over so the bottom is facing you.
Flip the laptop over so the bottom is facing you.
1024
Step 2
- Remove twelve 7.5 mm screws by using the Phillips #00 screwdriver.
Remove twelve 7.5 mm screws by using the Phillips #00 screwdriver.
Step 3
- Use plastic opening tool to remove the back cover.
- You might want to remove it slowly and gently because the back cover is very thin and fragile.
Use plastic opening tool to remove the back cover.
You might want to remove it slowly and gently because the back cover is very thin and fragile.
Step 4
- Remove three 4.2mm screws by using the Phillips #00 screwdriver.
Remove three 4.2mm screws by using the Phillips #00 screwdriver.
Step 5
- Disconnect the battery cable from the motherboard and remove the battery from the device.
Disconnect the battery cable from the motherboard and remove the battery from the device.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 5 other contributors
Shen Zhao
Member since: 10/01/2019
376 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Duke University Pratt School of Engineering, Team S5-G1, Matos-Garner Fall 2019
Member of Duke University Pratt School of Engineering, Team S5-G1, Matos-Garner Fall 2019
DUKEPSE-MATOS-GARNER-F19S5G1
5 Members
4 Guides authored
