Difficulty

Easy

Steps

9

Time Required

                          5 - 10 minutes

Sections

1

  • Battery
  • 9 steps

Flags

0

  • BackHP Envy Ultrabook 4-1015dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Removing the battery may be a necessary prerequisite for performing replacement of a different part of the device as well. In this case, this guide can also be useful for learning how to perform this first step.

What you need

Step 1

              Battery
  • Make sure that the device is turned off and that all external devices are removed.

Make sure that the device is turned off and that all external devices are removed.

1024

Step 2

  • Flip the device over so that the back plate is facing upwards.

Flip the device over so that the back plate is facing upwards.

Step 3

  • Using a small (size 0) Phillips head screwdriver, remove the twelve 5.5 mm external Phillips head screws that connect the back plate to the device.
  • Make sure to set the screws aside in a safe place so that you do not lose them, as they will be needed to reattach the backplate later.

Using a small (size 0) Phillips head screwdriver, remove the twelve 5.5 mm external Phillips head screws that connect the back plate to the device.

Make sure to set the screws aside in a safe place so that you do not lose them, as they will be needed to reattach the backplate later.

Step 4

  • Using the plastic opening tool, gently pry off the back plate from the device.

Using the plastic opening tool, gently pry off the back plate from the device.

Step 5

  • The large black box with the white warning images is the battery.
  • Move the ribbon cable so that it is no longer on top of the battery.

The large black box with the white warning images is the battery.

Move the ribbon cable so that it is no longer on top of the battery.

Step 6

  • Using a small (size 0) Phillips head screwdriver, remove the three 3.5 mm Phillips head internal screws that hold the battery in place.
  • Make sure not to lose these internal screws; they will later be used to reattach the battery.

Using a small (size 0) Phillips head screwdriver, remove the three 3.5 mm Phillips head internal screws that hold the battery in place.

Make sure not to lose these internal screws; they will later be used to reattach the battery.

Step 7

  • Lift up the battery and remove it from the slot as shown.

Lift up the battery and remove it from the slot as shown.

Step 8

  • Use the plastic opening tool to disconnect the battery cable.

Use the plastic opening tool to disconnect the battery cable.

Step 9

  • Lift up the battery and remove it from the device.

Lift up the battery and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Salvador Balkus

Member since: 10/15/2018

596 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S1-G3, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S1-G3, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S1G3                     


                                            5 Members                     


                                            6 Guides authored