Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
3
- Back Panel Assembly
- 2 steps
- Fan
- 2 steps
- Heat Sink
- 2 steps
Flags
2
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackHP Envy TouchSmart 4-1215dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Panel Assembly
- Remove the thirteen Phillips #0 screws.
Remove the thirteen Phillips #0 screws.
1024
Step 2
- Pull the panel up and off to remove from the laptop.
Pull the panel up and off to remove from the laptop.
Step 3
Fan
- Unplug the fan from the motherboard.
Unplug the fan from the motherboard.
Step 4
- Remove the four Phillips #0 screws holding in the fan.
- Pull out the fan.
Remove the four Phillips #0 screws holding in the fan.
Pull out the fan.
Step 5
Heat Sink
- Remove four screws from the heat sink using a Phillips #0 screwdriver.
Remove four screws from the heat sink using a Phillips #0 screwdriver.
Step 6
- Gently lift the heat sink from the motherboard.
Gently lift the heat sink from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Kristen Gismondi
Member since: 11/12/2014
69,397 Reputation
176 Guides authored
Badges:
44
+41 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored