Difficulty
Moderate
Steps
6
Time Required
7 minutes
Sections
3
- Back Panel Assembly
- 2 steps
- Fan
- 2 steps
- Headphone Jack
- 2 steps
Flags
0
BackHP Envy TouchSmart 4-1215dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel Assembly
- Remove the thirteen Phillips #0 screws.
Remove the thirteen Phillips #0 screws.
1024
Step 2
- Pull the panel up and off to remove from the laptop.
Pull the panel up and off to remove from the laptop.
Step 3
Fan
- Unplug the fan from the motherboard.
Unplug the fan from the motherboard.
Step 4
- Remove the four Phillips #0 screws holding in the fan.
- Pull out the fan.
Remove the four Phillips #0 screws holding in the fan.
Pull out the fan.
Step 5
Headphone Jack
- Unplug bus from motherboard
Unplug bus from motherboard
Step 6
- Remove the two Phillips #0 screws that hold the headphone jack to the laptop.
- Pull out to remove.
Remove the two Phillips #0 screws that hold the headphone jack to the laptop.
Pull out to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Gabriel Castro
Member since: 02/21/2018
175 Reputation
2 Guides authored
Badges:
3
Team
University of North Texas, Team S4-G5, Thompson Spring 2018
Member of University of North Texas, Team S4-G5, Thompson Spring 2018
UNT-THOMPSON-S18S4G5
5 Members
5 Guides authored
