Difficulty
Moderate
Steps
8
Time Required
5 minutes
Sections
2
- Battery
- 5 steps
- TouchPad
- 3 steps
Flags
0
BackHP Envy Sleekbook m6-k010dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the twelve 9 mm Phillips #00 screws.
Remove the twelve 9 mm Phillips #00 screws.
1024
Step 2
- Use the plastic opening tool and your hands to remove the bottom cover.
Use the plastic opening tool and your hands to remove the bottom cover.
Step 3
- Disconnect the battery power cable from the motherboard.
Disconnect the battery power cable from the motherboard.
Step 4
- Remove the six 6 mm Phillips #00 screws from the battery.
Remove the six 6 mm Phillips #00 screws from the battery.
Step 5
- Lift the battery out of the laptop.
Lift the battery out of the laptop.
Step 6
TouchPad
- Lift the white tab on the ZIF connector to unlock the ribbon cable.
- Pull the ribbon cable out of the ZIF connector.
Lift the white tab on the ZIF connector to unlock the ribbon cable.
Pull the ribbon cable out of the ZIF connector.
Step 7
- Remove the seven 3mm Phillips #00 screws from the trackpad.
Remove the seven 3mm Phillips #00 screws from the trackpad.
Step 8
- Use the plastic opening tool to lift the touchpad up and pull out to remove.
Use the plastic opening tool to lift the touchpad up and pull out to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
codi whittaker
Member since: 02/14/2018
478 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S1-G4, Nance Spring 2018
Member of USF Tampa, Team S1-G4, Nance Spring 2018
USFT-NANCE-S18S1G4
4 Members
15 Guides authored
