Difficulty

Moderate

Steps

11

Time Required

                          10 minutes

Sections

2

  • Battery
  • 5 steps
  • LCD
  • 6 steps

Flags

0

  • BackHP Envy Sleekbook m6-k010dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the twelve 9 mm Phillips #00 screws.

Remove the twelve 9 mm Phillips #00 screws.

1024

Step 2

  • Use the plastic opening tool and your hands to remove the bottom cover.

Use the plastic opening tool and your hands to remove the bottom cover.

Step 3

  • Disconnect the battery power cable from the motherboard.

Disconnect the battery power cable from the motherboard.

Step 4

  • Remove the six 6 mm Phillips #00 screws from the battery.

Remove the six 6 mm Phillips #00 screws from the battery.

Step 5

  • Lift the battery out of the laptop.

Lift the battery out of the laptop.

Step 6

              LCD
  • Remove the stickers from the bottom left and right corner of the device with a plastic opening tool.

Remove the stickers from the bottom left and right corner of the device with a plastic opening tool.

Step 7

  • Remove the two 2.5mm Phillips #00 screws found underneath the previously removed stickers.

Remove the two 2.5mm Phillips #00 screws found underneath the previously removed stickers.

Step 8

  • Use the plastic opening tool to pry the bezel free from the LCD housing.

Use the plastic opening tool to pry the bezel free from the LCD housing.

Step 9

  • Remove the four 2.5mm Phillips #00 screws located in each corner of the LCD screen.

Remove the four 2.5mm Phillips #00 screws located in each corner of the LCD screen.

Step 10

  • Use the plastic opening tool to remove the LCD screen from its housing.
  • Lay the LCD screen flat on the keyboard.

Use the plastic opening tool to remove the LCD screen from its housing.

Lay the LCD screen flat on the keyboard.

Step 11

  • Disconnect the cable which connects the LCD to the motherboard.
  • Pul the LCD screen out.

Disconnect the cable which connects the LCD to the motherboard.

Pul the LCD screen out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    codi whittaker

Member since: 02/14/2018

478 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S1-G4, Nance Spring 2018                        

                                                  Member of USF Tampa, Team S1-G4, Nance Spring 2018 



                    USFT-NANCE-S18S1G4                     


                                            4 Members                     


                                            15 Guides authored