Difficulty
Moderate
Steps
4
Time Required
5 - 10 minutes
Sections
2
- Battery
- 1 step
- Hard Drive
- 3 steps
Flags
0
BackHP Envy m6-n010dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Find the battery removal slider.
- Slide it across while simultaneously popping out and removing the device’s battery.
Find the battery removal slider.
Slide it across while simultaneously popping out and removing the device’s battery.
1024
Step 2
Hard Drive
- Remove the five marked screws found under the battery using a philips head screwdriver.
Remove the five marked screws found under the battery using a philips head screwdriver.
Step 3
- Remove the small panel on the back by prying it off. This should reveal the hard drive.
Remove the small panel on the back by prying it off. This should reveal the hard drive.
Step 4
- The hard drive is connected to the motherboard via this blue-tabbed cable, highlighted in red.
- Gently pry off the cover to release the cable.
- Slowly lift the hard drive out and away from the device.
The hard drive is connected to the motherboard via this blue-tabbed cable, highlighted in red.
Gently pry off the cover to release the cable.
Slowly lift the hard drive out and away from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Johnathan Morales
Member since: 02/08/2018
390 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
University of North Texas, Team S2-G1, Thomas Spring 2018
Member of University of North Texas, Team S2-G1, Thomas Spring 2018
UNT-THOMAS-S18S2G1
4 Members
6 Guides authored