Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

2

  • Lower Case
  • 4 steps
  • Speaker
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Envy Touchsmart m6-k022dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Lower Case
  • There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.

There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.

1024

Step 2

  • Next, use a size PH1 Philips head screw driver to remove the screws.

Next, use a size PH1 Philips head screw driver to remove the screws.

Step 3

  • Then, use a prying tool to help uncouple the backplate.

Then, use a prying tool to help uncouple the backplate.

Step 4

  • Finally, use both hands to lift up and take off the back plate of the computer.

Finally, use both hands to lift up and take off the back plate of the computer.

Step 5

              Speaker
  • Remove the two screws holding the speaker in place.
  • There are two red rubber grommets which stay situated in the screw guide holes; be sure not to lose these.

Remove the two screws holding the speaker in place.

There are two red rubber grommets which stay situated in the screw guide holes; be sure not to lose these.

Step 6

  • Once the screws have been removed, gently lift the speaker straight up, but just enough to dislodge it.
  • There is a cable connecting the speakers to the sound board. Be sure to not tug on this connection when lifting the speaker.

Once the screws have been removed, gently lift the speaker straight up, but just enough to dislodge it.

There is a cable connecting the speakers to the sound board. Be sure to not tug on this connection when lifting the speaker.

Step 7

  • Once the speaker is dislodged, gently pull the connecting cable from the sound card.
  • The speaker is now fully removed and ready to be replaced.

Once the speaker is dislodged, gently pull the connecting cable from the sound card.

The speaker is now fully removed and ready to be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Kareem Rigaud

Member since: 03/02/2017

403 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team S13-G6, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S13-G6, Cagle Spring 2017 



                    USFT-CAGLE-S17S13G6                     


                                            3 Members                     


                                            6 Guides authored