Hp Envy M6 K022Dx Cpu Fan Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

• Lower Case
• 4 steps
• CPU Fan
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Envy Touchsmart m6-k022dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Lower Case               

• There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.

There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.

1024

Step 2

• Next, use a size PH1 Philips head screw driver to remove the screws.

Next, use a size PH1 Philips head screw driver to remove the screws.

Step 3

• Then, use a prying tool to help uncouple the backplate.

Then, use a prying tool to help uncouple the backplate.

Step 4

• Finally, use both hands to lift up and take off the back plate of the computer.

Finally, use both hands to lift up and take off the back plate of the computer.

Step 5

              CPU Fan               

• The fan is located here. You will need to remove three screws in order to lift the fan out from the motherboard.
• You will need a Phillips 00 size screwdriver to remove the screws.

The fan is located here. You will need to remove three screws in order to lift the fan out from the motherboard.

You will need a Phillips 00 size screwdriver to remove the screws.

Step 6

• Use your screwdriver to remove the three screws connecting the fan to the motherboard.

Use your screwdriver to remove the three screws connecting the fan to the motherboard.

Step 7

• Grab the fan with your hand, and lift up and away from the motherboard.

Grab the fan with your hand, and lift up and away from the motherboard.

Step 8

• Grab the fan power connector by the wires and pull directly away from port until the cable is disconnected.

Grab the fan power connector by the wires and pull directly away from port until the cable is disconnected.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Jibreel Campbell                     

Member since: 03/02/2017

276 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team S13-G6, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S13-G6, Cagle Spring 2017 



                    USFT-CAGLE-S17S13G6                     


                                            3 Members                     


                                            6 Guides authored