Difficulty

Moderate

Steps

8

Time Required

                          2 - 3 minutes

Sections

3

  • Battery
  • 3 steps
  • Service Cover
  • 2 steps
  • Optical Disc Drive
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Envy dv7t-7200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Turn the power off and disconnect all cables and cords from the laptop.
  • Place the computer on its top on a flat surface with the hinges facing away from you.

Turn the power off and disconnect all cables and cords from the laptop.

Place the computer on its top on a flat surface with the hinges facing away from you.

1024

Step 2

  • Slide the battery release latch to the left which is located on the right-hand side of the battery.

Slide the battery release latch to the left which is located on the right-hand side of the battery.

Step 3

  • Tilt the battery away from you and lift out.

Tilt the battery away from you and lift out.

Step 4

              Service Cover
  • Using a Phillips #01 screwdriver, remove the Phillips PM2.5×5.5 screw on the service cover.
  • This screw does not come out of the service cover completely once loosened.

Using a Phillips #01 screwdriver, remove the Phillips PM2.5×5.5 screw on the service cover.

This screw does not come out of the service cover completely once loosened.

Step 5

  • Slide the service cover toward the front of the laptop.
  • Lift the service cover to remove it from the laptop.

Slide the service cover toward the front of the laptop.

Lift the service cover to remove it from the laptop.

Step 6

              Optical Disc Drive
  • Remove the Phillips PM2.5×4.0 screw that attaches the optical drive to the laptop.

Remove the Phillips PM2.5×4.0 screw that attaches the optical drive to the laptop.

Step 7

  • Press the tab with a metal spudger that is located next to the screw to release the optical drive.

Press the tab with a metal spudger that is located next to the screw to release the optical drive.

Step 8

  • Slide the disk drive out of the laptop.

Slide the disk drive out of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Krystal

Member since: 10/16/2017

882 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UW Tacoma, Team S3-G3, Liner Fall 2017                        

                                                  Member of UW Tacoma, Team S3-G3, Liner Fall 2017 



                    UWT-LINER-F17S3G3                     


                                            5 Members                     


                                            8 Guides authored