Difficulty
Moderate
Steps
15
Time Required
25 minutes
Sections
2
- Battery
- 3 steps
- Fan
- 12 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackHP Envy dv6-7363cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the device upside-down so that its bottom is facing up.
Flip the device upside-down so that its bottom is facing up.
1024
Step 2
- Push the lever underneath the battery to the left as shown in the picture.
Push the lever underneath the battery to the left as shown in the picture.
Step 3
- Lift the battery up out of its socket.
Lift the battery up out of its socket.
Step 4
Fan
- Remove the circled screws from the back panel.
Remove the circled screws from the back panel.
Step 5
- Lift and remove the back panel of the device.
Lift and remove the back panel of the device.
Step 6
- Flip the laptop back over and carefully pry the keyboard frame out of the device.
Flip the laptop back over and carefully pry the keyboard frame out of the device.
Step 7
- Lift the keyboard out of the device and carefully remove ribbon cables.
Lift the keyboard out of the device and carefully remove ribbon cables.
Step 8
- Flip device onto its back, remove disk tray and circled screw.
Flip device onto its back, remove disk tray and circled screw.
Step 9
- Flip device right-side-up and remove ribbon cables from plastic cover beneath keyboard. Remove plastic cover from device.
Flip device right-side-up and remove ribbon cables from plastic cover beneath keyboard. Remove plastic cover from device.
Step 10
- Disconnect red cord from DVD drive and remove DVD drive.
Disconnect red cord from DVD drive and remove DVD drive.
Step 11
- Remove circled screws.
Remove circled screws.
Step 12
- Disconnect red and white cords from blue circuit board.
Disconnect red and white cords from blue circuit board.
Step 13
- Gently pull circled pieces from their holsters.
Gently pull circled pieces from their holsters.
Step 14
- Turn device onto its back and remove circled screws from Wi-Fi card. Flip device back over and unscrew disk reader (circled in green).
Turn device onto its back and remove circled screws from Wi-Fi card. Flip device back over and unscrew disk reader (circled in green).
Step 15
- Remove circled screws from blue circuit board and lift fan assembly out of device.
Remove circled screws from blue circuit board and lift fan assembly out of device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
dylananthony
Member since: 10/20/2016
564 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team S2-G5, Bernier Spring 2018
Member of UMass Dartmouth, Team S2-G5, Bernier Spring 2018
UMASSD-BERNIER-S18S2G5
3 Members
4 Guides authored
zabadoo - May 11, 2020
Reply
My laptop is a slightly different model and everything provided by the author is likely accurate for their model. I only mention this to caution that your repair may be slightly different depending on your specific model. Mine was different in a few areas though held mostly true with my dv6t-7000. Cheers!
Shamsullo Quzratov - Oct 9, 2022
Reply
Salom menga shu modeldagi kompyuterni ustgi qopqogʻini topib pochta qila olasizmi iloji boʻlsa iltimos nomerim +998991768069 shu nomerga telfon qib bogʻlanishiz mumkin men bilan
