Hp Envy 7640 Paper Roller Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Paper Roller
4 steps

Flags

BackHP Envy 7640
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Paper Roller

Open the printer by pushing upwards on the plastic tabs located on the sides of the printer.
Remove the opening assist from its purchase by pushing it toward the front of the printer with a nylon spudger.
Remove the spring-loaded clip attached to the top of the printer by pushing it off of the hook.

Open the printer by pushing upwards on the plastic tabs located on the sides of the printer.

Remove the opening assist from its purchase by pushing it toward the front of the printer with a nylon spudger.

Remove the spring-loaded clip attached to the top of the printer by pushing it off of the hook.

1024

Step 2

Remove the last ten 12mm screws by placing the Torx 9 screwdriver in the screw slot and turning counterclockwise.
Remove the last two 12mm screws by placing the Torx 9 screwdriver in the screw slot and turning counterclockwise; the screen plate can now be separated from the printer by pushing out and to the right.
Take out the inner plastic frame (this piece is removeable after having removed the ten 12 mm screws outlined in the first bullet) by grasping the frame with both hands and carefully pulling the frame away from the printer body.

Remove the last ten 12mm screws by placing the Torx 9 screwdriver in the screw slot and turning counterclockwise.

Remove the last two 12mm screws by placing the Torx 9 screwdriver in the screw slot and turning counterclockwise; the screen plate can now be separated from the printer by pushing out and to the right.

Take out the inner plastic frame (this piece is removeable after having removed the ten 12 mm screws outlined in the first bullet) by grasping the frame with both hands and carefully pulling the frame away from the printer body.

Step 3

Grasp the gray lever of the black plastic cover of the rollers and gently pull the lever up and to the right.

Grasp the gray lever of the black plastic cover of the rollers and gently pull the lever up and to the right.

Step 4

Press the lever outwards and away from the paper rollers with one hand.
Pull the paper rollers up and out of your HP printer with one hand while the other continues to depress the lever away from the paper rollers.

Press the lever outwards and away from the paper rollers with one hand.

Pull the paper rollers up and out of your HP printer with one hand while the other continues to depress the lever away from the paper rollers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Nicholas Sheffler

Member since: 01/24/2018

384 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team S1-G2, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S1-G2, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S1G2                     


                                            3 Members                     


                                            5 Guides authored

Joshua Williams - Jan 4, 2023

is there a video

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team